Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/configs/releng/syslinux
AgeCommit message (Collapse)Author
2023-02-10mkarchiso: do not place memtest86+ in netboot artifactsnl6720
Move memtest86+ to `/boot/memtest86+/` on ISO 9660. That directory is not copied to netboot artifact output. Netboot boot menu https://ipxe.archlinux.org/releng/netboot/archlinux.ipxe does not have entries for memtest and archiso-manager removes these files (not the EFI one, though) before uploading the release files anyway.
2023-01-29Update URLsnl6720
* Update mkinitcpio-archiso project link, * Update code of conduct link, * Update arch-releng mailing list link, * Use HTTPS where possible, * Replace dead link.
2022-12-10configs/releng/syslinux/archiso_pxe-linux.cfg: replace checksum and verify ↵nl6720
with cms_verify=y Specify `cms_verify=y` in SYSLINUX/PXELINUX configuration to use OpenSSL CMS based method for verifying the root file system image against the code signing certificates in the initramfs. `checksum` and `verify` are removed since they essentially serve the same purpose and performing all the checks just needlessly delays boot. Additionally, the removal of `verify` allows to build the ISO without gpg, i.e. without using `mkarchiso`'s `-g` and `-G` options. Fixes #200
2022-10-22configs/: remove "Copy to RAM" boot entries since it is automatic nownl6720
The default is now copytoram=auto which enables copying to RAM when the rootfs image size is less than 4 GiB and free RAM exceeds the rootfs image size + 2 GiB. See https://gitlab.archlinux.org/mkinitcpio/mkinitcpio-archiso/-/issues/13 and https://gitlab.archlinux.org/mkinitcpio/mkinitcpio-archiso/-/merge_requests/26. Implements #177.
2022-03-25syslinux PXE: Forced all TFTP paths to be absoluteEric Toombs
By default, syslinux interprets TFTP paths as relative to the location of the *.c32 modules, regardless whether a path starts with a slash. Without the `::` that I added to all of these paths, syslinux cannot find these files. It searches for them in /%INSTALL_DIR%/syslinux//%INSTALL_DIR%/boot/x86_64/vmlinuz-linux, etc.
2021-07-29Remove SPDX license identifier from releng configsDavid Runge
configs/releng/*: Remove the SPDX license identifier comment from the configuration files in the profile, as they are not eligible for copyright.
2021-05-14Apply copytoram Boot Option Menu Entries also to relengSimon Wilper
2021-04-30configs/releng/syslinux/: increase serial baud rate to 115200nl6720
Additionally enable serial in baseline profile. Related to #75.
2020-12-01configs/releng/syslinux/archiso_pxe-linux.cfg: add missing /boot to initrd ↵nl6720
file path Fixes https://bugs.archlinux.org/task/68803 .
2020-11-30Keep all SYSLINUX files in /syslinuxnl6720
This gets rid of the duplicate ldlinux.c32 and the useless isolinux.cfg which only points to syslinux.cfg. Implements https://gitlab.archlinux.org/archlinux/archiso/-/issues/46 .
2020-10-31Set syslinux bootloader timeout to 15sDavid Runge
configs/releng/syslinux/archiso_sys.cfg: Set the syslinux bootloader timeout to 15s. In !97 it has accidentally been set to 1.5s.
2020-10-31Set bootloader timeouts to 15sDavid Runge
configs/releng/efiboot/loader/loader.conf, configs/releng/syslinux/archiso_sys.cfg: Set the bootloader timeout to 15s, as they have been set to an overly generous 30s in !79. Fixes #80
2020-10-29implement accessibility support in archisoAlexander Epaneshnikov
this fixes #67
2020-09-27Split SYSLINUX configuration into per-kernel configuration filesnl6720
Slightly simplifies adding boot loader configuration for more kernels. Unfortunately the INCLUDE statement doesn't support wildcards, so each new file must be manually included in the main syslinux configuration file (syslinux.cfg for baseline and archiso_sys.cfg for releng).
2020-09-27Do not rename the initramfs imagenl6720
This is a breaking change. archweb, archiso-manager and various documentation must be updated. * https://github.com/archlinux/archweb/blob/master/templates/releng/archlinux.ipxe * https://github.com/pierres/archiso-manager/blob/master/Makefile
2020-08-11configs/releng/syslinux/archiso_pxe.cfg: add "checksum" and "verify" boot ↵nl6720
options An ISO's checksum and GPG validation primarily matters when PXE booting, so it would be appropriate to enable these options for releng. They should protect against booting a corrupt image.
2020-07-29Add license and basic documentationDavid Runge
LICENSE: Add GPL-3.0 license. {{archiso,configs}/*,.editorconfig,.gitlab-ci.yml}: Add SPDX license identifier. Makefile: Add SPDX license identifier. Install the `run_archiso.sh` script as global executable `run_archiso`. Use -D and -t flags to install to install files more generically (without a previous call to install the directory). README.rst: Add README outlining the project's scope, how to build images from the profiles and how to test. AUTHORS.rst: Add list of all direct contributors to the repository. CONTRIBUTING.rst: Add basic contribution guidelines, explaining the linter and the license in use. Closes #7 Closes #3
2020-07-28Copy files more genericallyDavid Runge
configs/*: Copy all files that do not need a rename generically (not specifying a destination file name). Do not rename vmlinuz-linux to vmlinuz or vmlinuz.efi (as this serves no purpose and makes the scripts more complicated). Do not rename microcode (i.e. {amd,intel}-ucode.img) when copying them and change all boot loader configuration files that assume a renamed microcode image. Add note and link to Arch Linux wiki to state why memtest.bin is renamed to memtest. Copy license files for {amd,intel}-ucode and memtest more generically by placing them into subdirectories with the same name as the package (to circumenvent overwriting one other). Closes #33
2020-07-11Warn about Syslinux's reboot.c32 and poweroff.c32 requiring APMnl6720
configs/releng/syslinux/archiso_tail.cfg: APM is old and some motherboard firmwares have removed support for it. reboot.c32 and poweroff.c32 will not work on such firmwares. Add a help text to "Reboot" and "Power Off" boot menu entries that warns about requiring APM.
2020-07-11Automatically boot the installation environment from syslinuxnl6720
Timeout is 3 seconds to match systemd-boot's configuration.
2020-06-30Standardizing boot loader entry formatDavid Runge
{configs/releng/efiboot/loader/entries/archiso-x86_64-{cd,usb}.conf,configs/releng/syslinux/archiso_{pxe,sys}.cfg}: Standardizing the boot loader entry format by switching all entries to the form: "Arch Linux install medium (<CARCH>[, <PROPERTY>])". This removes the distinction between "CD" and "USB" when booting in UEFI "el-torito" (as the information is not useful). Changing some of the syslinux help text as well to reflect this change. This also drops the specific <CARCH> from the syslinux help text as it is duplicated information. Closes #24
2020-06-30Clear the screen after syslinux exitsnl6720
Reduce the time where boot loader artifacts linger on screen after the boot loader has done its job.
2018-08-18[configs/releng] Make and use amd_ucode.bin for initrd.Gerardo Exequiel Pozzi
Requested at FS#59694
2017-02-12[configs/releng] Remove i686 syslinux filesGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2014-10-31[configs/releng] Always load intel-ucode in early boot stageGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@gmail.com>
2013-10-19[archiso] changes for syslinux 6Gerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2013-05-30[configs/releng] Adjust TEXT HELP width of syslinux menus.Gerardo Exequiel Pozzi
Keep < 80 chars Fixes FS#35533 Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-12-21[configs/releng] Refactor build.sh: build only dual-isoGerardo Exequiel Pozzi
* This scripts, now runs only in x86_64. * build.sh does not require arguments to run (no more build, clean, purge). * /usr/share split is not done anymore: there are some differences between two arches. (ISO size +60MiB) * /usr/lib/modules split is not done anymore: this was never enabled officially in aitab. Tested and works fine. Maybe some small cosmetic changes needed. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-04[archiso] Rename archiso_curl_url= to archiso_http_srv=Gerardo Exequiel Pozzi
Also rename curlspace_size= to archiso_http_spc= Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-02[configs/releng] Make syslinux.cfg (loadconfig) with relative paths.Gerardo Exequiel Pozzi
We are only using these files only for SYSLINUX bootloader that supports ".." as directories. ISOLINUX jumps to archiso.cfg via isolinux.cfg PXELINUX goes directly to archiso.cfg via DHCP configuration. Suggested by Thomas. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-02[configs/releng] Use whichsys.c32 to determine bootloader typeGerardo Exequiel Pozzi
* In that way we can have two differents syslinux menus depending if booting from PXE or from non-PXE. Some file renames are made to keep things ordered: archiso_pxe* all things related to PXELINUX archiso_sys* all things related to SYSLINUX *_inc.cfg only contains INCLUDE directive * By default NBD PXE option is selected for booting on timeout. * As (NDB/NFS/HTTP/FTP) server is used the same IP from pxeserver. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-02[configs/*] syslinux: Use UI instead of DEFAULT for *menu.c32Gerardo Exequiel Pozzi
* UI is more correct than DEFAULT for simple menu system. * Remove TIMEOUT * Remove PROMPT 0, this is the default value. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-02[configs/releng] Split syslinux cfgs in single arch, like in dual archGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-11-28[configs/releng] Make all syslinux bootloaders works with the sames configs.Gerardo Exequiel Pozzi
* In that way, we have unified directory scheme among {pxe,sys,ext,iso}linux, sharing the same directory structure and config files. * Also enable IPAPPEND (will show a warning message about unknown directive in non-pxelinux before menu) NEW: * Rename syslinux*.cfg -> archiso*.cfg * Now syslinux.cfg is only a "loadconfig" trick like we are doing for isolinux * All paths are now relative to %INSTALL_DIR% ($archisobasedir) (Default: /arch/) Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-07-24[archiso] Update kernel image name for linux-3.0Gerardo Exequiel Pozzi
Also rename kernel from vmlinuz-linux to vmlinuz to make filename ISO9660 friendly. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-06-18[archiso] Use dm-snapshot instead of aufs2 (A.K.A. "The Big Commit")Gerardo Exequiel Pozzi
* Use device mapper + snapshot module, instead union layer filesystem. * A block-level approach vs vfs-level. * No more unofficial (Linux) things. * More memory is needed. * Refactor mkarchiso. * Refactor hooks/archiso. * Fix install/archiso_pxe_nbd (due recent change in mkinitcpio-0.6.15 on checked_modules()/all_modules()) [Thanks Dave for the improved workaround] * New configs/releng to build official images. * Works with a Bash script instead of Makefile. (better control and easy to maintain) * Remove configs/syslinux-iso. * Remove archiso2dual script. Integrate functionality in configs/releng. * New configs/baseline to build the most basic live medium or use as template. * New README (draft). [Thanks Dieter for fixing english grammar] Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Copyright © 2002-2022 Judd Vinet and Aaron Griffin. Copyright © 2022 Erich Eckner.
The Arch Linux name and logo are recognized trademarks. Some rights reserved. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis.