Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/archiso
AgeCommit message (Collapse)Author
2011-07-09[archiso] mark installed packages, after installing it, not beforeGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-06-18[archiso] Use dm-snapshot instead of aufs2 (A.K.A. "The Big Commit")Gerardo Exequiel Pozzi
* Use device mapper + snapshot module, instead union layer filesystem. * A block-level approach vs vfs-level. * No more unofficial (Linux) things. * More memory is needed. * Refactor mkarchiso. * Refactor hooks/archiso. * Fix install/archiso_pxe_nbd (due recent change in mkinitcpio-0.6.15 on checked_modules()/all_modules()) [Thanks Dave for the improved workaround] * New configs/releng to build official images. * Works with a Bash script instead of Makefile. (better control and easy to maintain) * Remove configs/syslinux-iso. * Remove archiso2dual script. Integrate functionality in configs/releng. * New configs/baseline to build the most basic live medium or use as template. * New README (draft). [Thanks Dieter for fixing english grammar] Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-05-07[archiso] Update fstab and "source dev" of aufs.Gerardo Exequiel Pozzi
* Change from none -> union (looks like util-linux is confused BUG?) Avoid the message: "umount aufs failed: not found" at shutdown. #1 mount -t tmpfs none /something #2 mount -t tmpfs xxxx /something The output of findmnt -rnu -o SOURCE will be blank in #1. * Change from aufs -> auto, make its more generic. * Update devpts and shm entries. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-04-11[archiso] Set default SquashFS compressor to XZGerardo Exequiel Pozzi
Also change all references from lzma to xz format. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-03-20Fix old port reference in NBD boot scriptSimo Leone
2010-12-08[archiso] Fix tabs/spaces in mkarchisoGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-12-08[archiso] Use poll_device() in _pxe_nbd and _loop_mnt hooks.Gerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-12-07Unify scheme of sed replacements.Gerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-12-07[archiso] Add support to mount iso in loopback mode.Gerardo Exequiel Pozzi
Add two parameters: img_dev=/dev/sdNM where /dev/sdNM is the device where .iso is located. img_loop=/path/to/arch.iso where /path/to/arch.iso is the full path of the .iso in the device img_dev. Original idea from Baurzhan Muftakhidinov. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-12-07[archiso] Place *.sqfs images in /${install_dir}/${arch}/Gerardo Exequiel Pozzi
Unify with dir layout of -dual images. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-11-30[archiso] Add -D <install_dir> option to mkarchisoGerardo Exequiel Pozzi
-D <install_dir> allow to select install directory on target media defaults to "arch". There is a new %INSTALL_DIR% macro for syslinux.cfg. This is how ISO will look now: /syslinux only syslinux related files (syslinux.cfg, *.c32, etc) /arch/ isomounts + *.sqfs images /arch/boot/ Linux + initramfs + Memtest86+ + other files for early boot stage Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-10-18[archiso] Add support for squashfs compression typesGerardo Exequiel Pozzi
Add a note about supported status in Linux versions. Needs squashfs-tools-4.1 (now on extra). Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-10-17Do not unset archisobasedir when it's setThomas Bächler
This was wrong and can never have worked. Fix it.
2010-10-12[archiso] Update nbd hook to match newer nbd operation mode.Gerardo Exequiel Pozzi
Newer nbd-server uses config file instead of parameters via cmd line (deprecated). Also does not use a fixed port (oldstyle). Sample nbd-server.conf that works with this change: -- CUT HERE -- [generic] [archiso] readonly = true exportname = /tmp/archlinux.iso -- CUT HERE -- Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-09-16Do not copy host configuration to root-imageGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-07-22Rename all occurrences of isolinux to syslinuxThomas Bächler
The name of the bootloader is syslinux, while isolinux is just one of many components. isolinux.bin now also accepts syslinux.cfg as a configuration file name (as do all other loaders). Thus, rename the isolinux/ folder to syslinux/, and rename isolinux.cfg to syslinux.cfg. The only occurrence of 'isolinux' is now the actual loader file 'isolinux.bin'. This makes the transition from isolinux to the other syslinux loaders easier when remastering the ISO onto another medium.
2010-07-13[archiso_pxe_nbd] Remove unneeded umount commandsGerardo Exequiel Pozzi
This step is now done at archiso hook (commit 1fc3a61b75) Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-07-09Call launch_interactive_shell in more cases of error.Gerardo Exequiel Pozzi
A shell prompt is at least better than a kernel panic :) Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-07-09Rename directories and parameteres to be more descriptiveGerardo Exequiel Pozzi
* squashfs images that will be part of read-only branchs for union mount in / are mounted on /ro_branch/{image_name} instead of /tmpfs/mnt/{image_name} (and avoid empty dirs on live env under /mnt) * tmpfs that will be part of read-write branch for union mount in / is mounted on /rw_branch instead of /tmpfs * tmpfs that is for store *.sqfs images when copytoram=y, is mounted on /copytoram instead of /tmpfs.sqfs * tmpfs_size= parameter renamed to rw_branch_size= * tmpfs_sqfs_size= parameter renamed to copytoram_size= Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-07-09First mount ${archisodevice} before other mountsGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-07-08archiso hook: umount /bootmnt if copytoram=yGerardo Exequiel Pozzi
More generic way than current method, and fix if logic (inverted). Takes the same actions independent of medium (disk/cdrom). Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-07-05Mount tmpfs filesystems with mode=0755Gerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-06-30[archiso] Rewrite cleanup step in mkarchisoGerardo Exequiel Pozzi
Currently works partially since in bash "*" is not expanded. Old dirs removed, always empty dirs removed from list. Also cleanup sync databases from pacman 3.4.0, avoiding problems with pacman -Sy since "sync" directory is deleted. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-06-29Improved testiso to allow differents scenariosGerardo Exequiel Pozzi
A quick & dirty changes to test iso withs differents combinations of I={virtio,scsi,ide} x M={disk,cdrom} Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-06-23Make it compatible with latest mkinitcpio.Gerardo Exequiel Pozzi
Latest init script mounts a /dev FS, so /dev/loop0 will disappear. Create loop0 on /lib/udev/devices so udev copy to /dev on startup. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-06-04Add optional command line parameter: archisobasedirThomas Bächler
When remastering the image onto a USB volume, you might want to reuse an existing partition without filling the root with lots of archiso files. The archisobasedir parameter allows to specify a new root directory, isomounts and all images will be searched in this directory.
2010-05-16archiso_pxe_nbd: Remove unnecessary/unsupported network modulesThomas Bächler
The archiso_pxe_nbd hook adds all network modules, including ones that are not supported: The hook only supports ethernet devices, so there is no need to add wireless, wimax, ppp, irda and plip modules. Adding the wireless modules had an undesired side effect: The wireless driver was loaded in the initramfs stage, where the required crypto modules were unavailable. This caused the initialization of the wireless devices to fail. This patch removes all network modules except ethernet.
2010-05-09archiso: Support booting from a virtio CD driveThomas Bächler
2010-03-21[archiso] Add support to setups with more than one network card.Gerardo Exequiel Pozzi
Otherwise archiso_pxe_nbd hook can configure the incorrect network card, because ipconfig will configure all interfaces available. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-03-21[archiso] Fix install dir perms 644 -> 755 in MakefileGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-03-18[archiso] Use a mount handler in archiso_pxe_nbd hookGerardo Exequiel Pozzi
* Register a mount_hook if booted via PXE. This allows to do all needed steps before and after calling archiso_mount_handler. * umount and disconnect network device if copytoram=y Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-03-18[archiso] Rename nbd hook to archiso_nbdGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-03-17[archiso] Add nbd hook, to make posible boot archiso from PXE via a NBD.Gerardo Exequiel Pozzi
nbd (network block device utilities) package is required. This package is in AUR at this moment: http://aur.archlinux.org/packages.php?ID=9691 Also mkinitcpio-nfs-utils is required for ipconfig. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-03-16Remove archiso_early hook, use /dev/disk/by-label/${archisolabel} instead.Gerardo Exequiel Pozzi
Takes the advantage of already symlinks created on /dev/disk/by-label/ by 60-persistent-storage.rules add by udev hook. Tested on: * Real machine as CD-ROM and USB key drive. * KVM as CD-ROM and DISK (for both modes, in combination with IDE and SCSI) * VirtualBox as IDE CD-ROM. IMPORTANT note: Since isohybrid is a hack, if more partitions are added to USB key drive, filesystem on these partitions MUST have LABEL, otherwise USB key will fail to boot. Anyway there is an option archisodevice=, to force and specific device where live-media reside. (Maybe isohybrid will change the hack method used in a future) More info at: http://mailman.archlinux.org/pipermail/arch-releng/2010-March/000890.html http://mailman.archlinux.org/pipermail/arch-releng/2010-March/000913.html Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-03-16Revert back isohybrid offset to default setting.Gerardo Exequiel Pozzi
This revert back the commit 991a5c69. This causes more problems than solving (fixing the warning issue in parted) With the default offset 0: * makes posibble to create others extra partitions on USB key and use them inside the live enviroment. * makes posible to use /dev/disk/by-label/ symlinks. archiso_early hook, can be removed. Note: archboot also uses the default offset 0. More info at: http://mailman.archlinux.org/pipermail/arch-releng/2010-March/000912.html http://mailman.archlinux.org/pipermail/arch-releng/2010-March/000890.html Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-03-15Fixed msg about copying images to RAMGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-03-14Add missing archiso_early on uninstall procedure at MakefileGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-03-06Add -p to blkid in hooks, to bypass the cache like in udev rules.Gerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-03-01Split aufs mount command from _mnt_squashfs()Gerardo Exequiel Pozzi
New function _mnt_aufs(). Don't display incorrect message (Adding new aufs...) when no aufs branch is mounted, because mount type is bind. Also, makes the code more clean :) Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-03-01Welcome back copytoram= optionGerardo Exequiel Pozzi
Fixes FS#17182: copytoram=y does not work with aufs The solution is simple, just use a directory outside aufs tree. * If copytoram=y, then another tmpfs is mounted but on /tmpfs.sqfs * Add a new option: tmpfs_sqfs_size= (default to 75%) * Lock cdrom drive is not locked if copytoram=y Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-02-18Rename archiso-early hook to archiso_earlyGerardo Exequiel Pozzi
To make compatible with disablehooks= param. Since "hook_archiso-early" is not a valid variable name. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-02-17Removed a non-working option: copytoramGerardo Exequiel Pozzi
Keep the code clean. For more reference see FS#17182 to view what is the issue Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-02-17Fix coding style in archiso hookGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-02-17Pass $newroot as part of the $mountpoint avoiding a global variableGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-02-17Take advantage of module autoloading when mounting images as loopGerardo Exequiel Pozzi
* Make first /dev/loop0 device at archiso install hook. * Remove unneeded losetup, all is done directly via mount. * Images are now mounted on /tmpfs/mnt/image-name instead of /tmpfs/mnt/loopN, removing unneeded counter. * Add some variables to make code more readable. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-02-17Drop to recovery shell when mounting main media filesystem fails.Gerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-02-16Implement mount hook function in archiso hook.Gerardo Exequiel Pozzi
Next version of mkinitcpio > 0.6.2 implements mount hook functionality. So can avoid skipping normal flow of main init script, and removing common end code with it. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-02-08Fixed offset of partition on isoGerardo Exequiel Pozzi
Split from commit 00dda7d4 from Svenstaro repo: changed -offset for mkarchiso from default 0 to 1 so that the other partition on the usb device can still be edited after dd'ing to it Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-02-06Remove special handling for vfat, all done via blkidGerardo Exequiel Pozzi
* Add archisodevide= boot option (suggested by brain0) (if declared use it, if not use /dev/archiso created via udev rule) * Removed redundant modprobe commands, (modules are loaded automatically on mount -t) * Other minor changes Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2010-02-06Update archiso hooks to work with next mkinitcpio 0.6Gerardo Exequiel Pozzi
Some basic changes to make archiso hooks work with the next mkinitcpio 0.6 Tested under KVM, a ""2010.02"" and works fine with it. NOTE: current mkinitcpio-0.5.99.2-2 does not include "losetup", maybe will be included in next version, see #[1]. For now must be added manually. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Copyright © 2002-2022 Judd Vinet and Aaron Griffin. Copyright © 2022 Erich Eckner.
The Arch Linux name and logo are recognized trademarks. Some rights reserved. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis.