| Age | Commit message (Collapse) | Author |
|---|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Remove devtools dependency.
* Better control over what files are touched inside chroot (root-image).
Now: NONE :)
* Two new commands:
+ init: To install {base} group and other needed packages (syslinux for now)
+ run: If we want to run some command inside chroot
(mkinitcpio, locale-gen, useradd, etc etc...)
* Renamed command: "created" to "install", says much better what does.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This was useful to me during development of dm-snapshot support
to create very quickly isos without wating for SquashFS compression.
Is time to remove this, I think the is no practical usage,
and make the code a bit more simple.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
We are currently checksuming all files inside $archisobasedir
(aitab, *sfs, kernel/initramfs and boot/syslinux related files)
this is stored in one file only. Its works good for now,
but I think we only need to checksum only aitab and *.sfs if they are needed.
Currently if you boot a dual-iso in i686, also checksum is done
for *.sfs of x86_64. Not a big issue, this just take a bit more time.
The real issue is when booting via PXE with HTTP/FTP methods,
since they download only aitab and needed *.sfs files,
can not use directly the only one file where checksums are stored.
This patch does:
(1) Do not checksum syslinux related files, anyway you are already reach initramfs stage.
(2) Do not checksum kernel/initramfs files, for the same as (1)
(3) Two checksum.${arch}.md5 for each i686 and x86_64 for only aitab and *.sfs.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This is now supported since util-linux pkg enable it.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Preparing terrain for UEFI support.
* Also make isohybrid hack in one step.
* Removed UDF layer, since xorriso does not support it.
* Removed unsupported options by xorriso (-uid/-gid/-allow-limited-size)
* Removed option already default in xorriso (-input-charset utf-8)
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Default (if not specified) -w work -o out.
-o <out_dir> is only used by 'iso' command.
Adjust build.sh of releng and baseline profile to reflect this change.
<project>
- work <- $work_dir
- out <- $out_dir
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Also put _is_directory_changed() inside 'if' avoiding premature execution if it returns non-zero.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
* Use device mapper + snapshot module, instead union layer filesystem.
* A block-level approach vs vfs-level.
* No more unofficial (Linux) things.
* More memory is needed.
* Refactor mkarchiso.
* Refactor hooks/archiso.
* Fix install/archiso_pxe_nbd
(due recent change in mkinitcpio-0.6.15 on checked_modules()/all_modules())
[Thanks Dave for the improved workaround]
* New configs/releng to build official images.
* Works with a Bash script instead of Makefile.
(better control and easy to maintain)
* Remove configs/syslinux-iso.
* Remove archiso2dual script. Integrate functionality in configs/releng.
* New configs/baseline to build the most basic live medium or use as template.
* New README (draft). [Thanks Dieter for fixing english grammar]
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Also change all references from lzma to xz format.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Unify with dir layout of -dual images.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
-D <install_dir> allow to select install directory on target media
defaults to "arch".
There is a new %INSTALL_DIR% macro for syslinux.cfg.
This is how ISO will look now:
/syslinux only syslinux related files (syslinux.cfg, *.c32, etc)
/arch/ isomounts + *.sqfs images
/arch/boot/ Linux + initramfs + Memtest86+ + other files for early boot stage
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Add a note about supported status in Linux versions.
Needs squashfs-tools-4.1 (now on extra).
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
The name of the bootloader is syslinux, while isolinux is just one
of many components. isolinux.bin now also accepts syslinux.cfg
as a configuration file name (as do all other loaders).
Thus, rename the isolinux/ folder to syslinux/, and rename
isolinux.cfg to syslinux.cfg. The only occurrence of 'isolinux'
is now the actual loader file 'isolinux.bin'. This makes
the transition from isolinux to the other syslinux loaders
easier when remastering the ISO onto another medium.
|
|
Currently works partially since in bash "*" is not expanded.
Old dirs removed, always empty dirs removed from list.
Also cleanup sync databases from pacman 3.4.0, avoiding problems with
pacman -Sy since "sync" directory is deleted.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This revert back the commit 991a5c69.
This causes more problems than solving (fixing the warning issue in parted)
With the default offset 0:
* makes posibble to create others extra partitions on USB key
and use them inside the live enviroment.
* makes posible to use /dev/disk/by-label/ symlinks.
archiso_early hook, can be removed.
Note: archboot also uses the default offset 0.
More info at:
http://mailman.archlinux.org/pipermail/arch-releng/2010-March/000912.html
http://mailman.archlinux.org/pipermail/arch-releng/2010-March/000890.html
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Split from commit 00dda7d4 from Svenstaro repo: changed -offset for mkarchiso
from default 0 to 1 so that the other partition on the usb device can
still be edited after dd'ing to it
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Also use ARCH_YYYYMM format instead of random chars, removing pwgen dep.
Closing FS#14919.
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Only support syslinux now. Grub and other things can still
be managed manually by running mkisofs manually.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
|
|
|
|
As in title, this patch cleans up opt flags that exist for no reason and
adds additional flags to modify the disk meta info which would otherwise
be hardcoded.
I wasn't quite sure about the user directory part but it doesn't seem
like a good idea to put that part into the script and therefore I
commented it out. It would probably interfere with rc.local scripts that
take care of skel copying. I replaced the part after the TODO with a
safe guard to make sure that people who are not aware of the changes
will not be caught by surprise.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
Check if there are any modification of files/directories inside
the target directory for squashfs image.
Implements in some way this item in TODO:
* Add 'needsupdate' function to check if a squashfs image in the
iso dir is up to date, if so, skip it; else rebuild it. No more
need for the -f flag
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
The current implementation in how partition is created for ext2 img
it looks a bit bad.
This patch makes the partition in more standarized way, respecting
cylinder alignement:
* The size of resulting image will be in cylinder multiple ~8MB.
* Use fdisk instead of sfdisk (sfdisk write some bad information)
* Make the result image in one pass, instead of concatenating.
Also the advantage is that with this can add another partitions
without any issues in the usb-flash-drive with this .img.
For example of current situation:
qemu-system-x86_64 -hda archlinux-avr.toolchain.img -serial stdio
---------------------------------------------------------------------
[root@avr ~]# fdisk /dev/sda
Command (m for help): p
Disk /dev/sda: 223 MB, 223974400 bytes
59 heads, 41 sectors/track, 180 cylinders
Units = cylinders of 2419 * 512 = 1238528 bytes
Disk identifier: 0x00000000
Device Boot Start End Blocks Id System
/dev/sda1 * 1 181 218693+ 83 Linux
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(0, 1, 1) logical=(0, 1, 23)
Partition 1 has different physical/logical endings:
phys=(27, 58, 41) logical=(180, 49, 21)
Command (m for help): v
Partition 1 has different physical/logical beginnings (non-Linux?):
phys=(0, 1, 1) logical=(0, 1, 23)
Partition 1 has different physical/logical endings:
phys=(27, 58, 41) logical=(180, 49, 21)
Partition 1: previous sectors 437449 disagrees with total 67731
62 unallocated 512-byte sectors
Command (m for help):
---------------------------------------------------------------------
qemu-system-x86_64 -hda archlinux-avr.toolchain-fix.img -serial stdio
---------------------------------------------------------------------
[root@avr ~]# fdisk /dev/sda
Command (m for help): p
Disk /dev/sda: 230 MB, 230307840 bytes
255 heads, 63 sectors/track, 28 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x5c94ca4f
Device Boot Start End Blocks Id System
/dev/sda1 * 1 28 224878+ 83 Linux
Command (m for help): v
62 unallocated 512-byte sectors
---------------------------------------------------------------------
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
|
|
This will generate a label ARCHISO_$randomstring using the pwgen
utility and add this label to the kernel command line.
A new label will be generated for each image, so it can be uniquely
identified.
Patch from brain0 <thomas@archlinux.org>
Signed-off-by: Gerhard Brauer <gerbra@archlinux.de>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
This flag allows to specify a own pacman.conf using during mkarchiso.
Signed-off-by: Gerhard Brauer <gerbra@archlinux.de>
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Option syntax for quiet mode in mkisofs has changed
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Loui Chang <louipc.ist@gmail.com>
[Fixed menu.lst: LiveCD -> Live CD -aaron]
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Whoops, *.img expands if we're building USB images.
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Conversion issue when dropping mkusbimg. Use work_dir/iso
to get the proper image size
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Guess what? rm -f won't remove a dir. Whoops
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
This was causing sfdisk and grub to balk
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Use the -C flag to allow us to build alternate isos on
a different architecture and things of the sort
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Not needed as we ensure files are in the ISO dir
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|
|
Signed-off-by: Aaron Griffin <aaronmgriffin@gmail.com>
|