Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-04-01[archiso] Re-order and use long xorrisofs options.Gerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-17[archiso] Set a safe locale to CGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-17[archiso] Improve help message of mkarchisoGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-17[configs/releng] Fix tabs in hostsGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-17[configs/releng] Remove local copy of resolv.confGerardo Exequiel Pozzi
Nobody touches this file now (previously was mkarchroot) Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-17[configs/releng] Use installed locale.gen instead of local copy.Gerardo Exequiel Pozzi
Now we can do this, since nobody touches this file before this step. (previously by mkarchroot) Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-17[configs/releng] Add new build mode: allGerardo Exequiel Pozzi
This mode allow to build all 6 ISOs in just one step if build type is <all>. So "build.sh build all all" -> (single-i686, single-x86_64, dual) X (netinstall, core). Note that the <purge> command is executed between each build step to save space, so do not use this mode if you want to keep all temporal files in work_dir. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-16[archiso] Update READMEGerardo Exequiel Pozzi
Make build steps much more simply (remove chroot build is not really needed now). Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-16[configs/releng] Use private pacman.db on make_core_repoGerardo Exequiel Pozzi
This allow to execute build.sh in 32-bit-compat without using a chroot and doing tricks. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-16[archiso] Implement own chroot functions in mkarchisoGerardo Exequiel Pozzi
* Remove devtools dependency. * Better control over what files are touched inside chroot (root-image). Now: NONE :) * Two new commands: + init: To install {base} group and other needed packages (syslinux for now) + run: If we want to run some command inside chroot (mkinitcpio, locale-gen, useradd, etc etc...) * Renamed command: "created" to "install", says much better what does. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-15[archiso] archiso_shutdown: Avoid mtab warning (not found)Gerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-15[archiso] Copy "mount" in archiso_shutdownGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-12[archiso] README updateGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-05[archiso] README updateGerardo Exequiel Pozzi
Use new -d option in mkarchroot (mount /dev as devtmpfs), then avoid mknod for loop dev. (Needs devtools >= 20120305) Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-03-04[archiso] /lib/initcpio -> /usr/lib/initcpioGerardo Exequiel Pozzi
Needs mkinitpcio >= 0.8.4 Next changes will be for mdadm and mkinitcpio-nfs-utils: * /lib/initcpio/udev/11-dm-initramfs.rules * /lib/initcpio/ipconfig , /lib/initcpio/nfsmount Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-02-23[archiso] Remove uneeded /run/archiso/img_dev_loopGerardo Exequiel Pozzi
Superseded by /run/archiso/used_block_devices Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-02-23[archiso] Update archiso_shutdown hookGerardo Exequiel Pozzi
* Add libraries from /usr/lib and /sbin/losetup. * Use used_block_devices to detach loop devices. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-02-22[configs/releng] Add /run/aif/ignore_block_devicesGerardo Exequiel Pozzi
This is just a symlink to /run/archiso/used_block_devices Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-02-22[archiso] Add /run/archiso/used_block_devicesGerardo Exequiel Pozzi
This list includes block devices of: * Boot medium [archisodevice] (only if no copytoram= is used) * Loop medium [img_dev] (only if no copytoram= is used) * COW space [cowdevice] (only if cowdevice= is used (no tmpfs is used)) * Loop devices used for SquashFS images. * Loop devices used for device-mapper devices (two per each dm-device, one RO{*.fs} and one RW{*.cow}) Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-02-22[archiso] Use losetup/mount instead of mount directly *.sfsGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-02-22[archiso] Setup ro loop devs as read-onlyGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-02-22[archiso] Use _mnt_dev() for SquashFS and dm-mapperGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-02-22[archiso] Remove uneeded ;Gerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-02-22[configs/releng] packages: btrfs-progs-unstable -> btrfs-progsGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-02-22[archiso] Misc style cleanupsGerardo Exequiel Pozzi
* Add #!/bin/bash to install hooks and fixed vimlines. * Removed empty variables. * Reorder variables, adjust brace/parens in functions. * Removed things implemented in base hook (/tmp, /etc/fstab). Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-02-03[archiso] Avoid full path in add_binaryGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-01-11[archiso] Refactor: Use losetup from util-linuxGerardo Exequiel Pozzi
New losetup from util-linux 2.21 uses new /dev/loop-control from Linux 3.1. Needs mkinitcpio-0.8.2+ (provides modules.devname, or workaround with earlymodules=loop) Get advantages from it! Removing custom shell code. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-01-05[archiso] simplify _mnt_fs() and _mnt_sfs()Gerardo Exequiel Pozzi
mount is now from util-linux (like in e135003c13aef15abc78562a3ab17fa41c0330cc) Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-01-05[archiso] Make fstab from initramfsGerardo Exequiel Pozzi
This is needed for initscripts 2012.01, at least the entry for /. Otherwise / is remounted ro, but not remounted rw later. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2012-01-05[archiso] README: Fixed a tiny issuejamesm-sitegen
We are not inside the chroots until we are chrooted ;-) Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-16[archiso] update testisoGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-04[archiso] Rename archiso_curl_url= to archiso_http_srv=Gerardo Exequiel Pozzi
Also rename curlspace_size= to archiso_http_spc= Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-03[archiso] archiso_pxe_curl rename to archiso_pxe_httpGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-03[archiso] Cleanup: pxe_curl: Remove download-iso-loopback support.Gerardo Exequiel Pozzi
This was the first implementation that downloads the complete ISO, but now we have the posibility of download only needed *.sfs files. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-03[archiso] Cleanup: Remove *.fs support.Gerardo Exequiel Pozzi
This was useful to me during development of dm-snapshot support to create very quickly isos without wating for SquashFS compression. Is time to remove this, I think the is no practical usage, and make the code a bit more simple. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-02[configs/releng] Add darkhttpd to packages.*Gerardo Exequiel Pozzi
Simple way to enable self-PXE-server live-enviroment with HTTP. dnsmasq --port=0 \ --enable-tftp \ --tftp-root=/run/archiso/bootmnt \ --dhcp-range=192.168.0.2,192.168.0.254,86400 \ --dhcp-boot=/arch/boot/syslinux/gpxelinux.0 \ --dhcp-option-force=209,boot/syslinux/archiso.cfg \ --dhcp-option-force=210,/arch/ darkhttpd /run/archiso/bootmnt Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-02[configs/releng] Make syslinux.cfg (loadconfig) with relative paths.Gerardo Exequiel Pozzi
We are only using these files only for SYSLINUX bootloader that supports ".." as directories. ISOLINUX jumps to archiso.cfg via isolinux.cfg PXELINUX goes directly to archiso.cfg via DHCP configuration. Suggested by Thomas. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-02[configs/releng] Use whichsys.c32 to determine bootloader typeGerardo Exequiel Pozzi
* In that way we can have two differents syslinux menus depending if booting from PXE or from non-PXE. Some file renames are made to keep things ordered: archiso_pxe* all things related to PXELINUX archiso_sys* all things related to SYSLINUX *_inc.cfg only contains INCLUDE directive * By default NBD PXE option is selected for booting on timeout. * As (NDB/NFS/HTTP/FTP) server is used the same IP from pxeserver. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-02[archiso] Do not use PXE NBD as default.Gerardo Exequiel Pozzi
* Now we have more than one PXE boot methods. * archiso_ndb_srv= accepts special ${pxeserver} parameter like in others PXE hooks. * This allows to setup network from initramfs without forcing using a special PXE hook. * Update README Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-02[configs/*] syslinux: Use UI instead of DEFAULT for *menu.c32Gerardo Exequiel Pozzi
* UI is more correct than DEFAULT for simple menu system. * Remove TIMEOUT * Remove PROMPT 0, this is the default value. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-12-02[configs/releng] Split syslinux cfgs in single arch, like in dual archGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-11-29actually copy the archiso_kms hook to workdirThomas Bächler
2011-11-29Add common KMS modules to the releng initramfs image.Thomas Bächler
On machines with common graphics chipsets (radeon, intel, nvidia), enable KMS early. Downloading images from a remote server can take time, better view the status with a nice resolution.
2011-11-29[archiso] Fix libnss symlinks.Gerardo Exequiel Pozzi
Otherwise does not work. 22100 Nov 29 09:29 ./lib/libnss_dns-2.14.1.so 20 Nov 29 09:29 ./lib/libnss_dns.so.2 -> libnss_dns-2.14.1.so 46732 Nov 29 09:29 ./lib/libnss_files-2.14.1.so 22 Nov 29 09:29 ./lib/libnss_files.so.2 -> libnss_files-2.14.1.so Looks like my test was made before introducing symlinks and using directly libnss_dns-$VERSION.so.2 as libnss_dns.so.2. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-11-28[archiso] Add checksum support to pxe_curlGerardo Exequiel Pozzi
Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-11-28[archiso] Checksum only aitab and *.sfs (per architecture)Gerardo Exequiel Pozzi
We are currently checksuming all files inside $archisobasedir (aitab, *sfs, kernel/initramfs and boot/syslinux related files) this is stored in one file only. Its works good for now, but I think we only need to checksum only aitab and *.sfs if they are needed. Currently if you boot a dual-iso in i686, also checksum is done for *.sfs of x86_64. Not a big issue, this just take a bit more time. The real issue is when booting via PXE with HTTP/FTP methods, since they download only aitab and needed *.sfs files, can not use directly the only one file where checksums are stored. This patch does: (1) Do not checksum syslinux related files, anyway you are already reach initramfs stage. (2) Do not checksum kernel/initramfs files, for the same as (1) (3) Two checksum.${arch}.md5 for each i686 and x86_64 for only aitab and *.sfs. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-11-28[configs/releng] Make all syslinux bootloaders works with the sames configs.Gerardo Exequiel Pozzi
* In that way, we have unified directory scheme among {pxe,sys,ext,iso}linux, sharing the same directory structure and config files. * Also enable IPAPPEND (will show a warning message about unknown directive in non-pxelinux before menu) NEW: * Rename syslinux*.cfg -> archiso*.cfg * Now syslinux.cfg is only a "loadconfig" trick like we are doing for isolinux * All paths are now relative to %INSTALL_DIR% ($archisobasedir) (Default: /arch/) Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-11-28[archiso] Add DNS resolver support to archiso_pxe_commonGerardo Exequiel Pozzi
[ramfs /]# cat /etc/resolv.conf nameserver 192.168.0.77 [ramfs /]# curl -O http://releng.archlinux.org/pxeboot/README % Total % Received % Xferd Average Speed Time Time Time Current Dload Upload Total Spent Left Speed 100 1129 100 1129 0 0 2191 0 --:--:-- --:--:-- --:--:-- 4589 [ramfs /]# Do not "add_binary /lib/libnss_dns.so.2", because will add libnss_dns-VERSION.so.2 as libnss_dns.so.2 Is not an issue will work (nobody links directly to VERSION), but is not nice. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>
2011-11-28[archiso] Add PXE NFS supportGerardo Exequiel Pozzi
It add support for using *.sfs images via NFS. It must be located after archiso_pxe_nbd in mkinitcpio.conf, in that way NBD is the default. New boot parameters: archiso_nfs_srv=IP:/path Set the NFS IP and path. Accepts ${pxeserver} as IP. archiso_nfs_opt= Sets NFS mount opts (comma separated) Defaults to: port = as given by server portmap daemon rsize = 1024 wsize = 1024 timeo = 7 retrans = 3 acregmin = 3 acregmax = 60 acdirmin = 30 acdirmax = 60 flags = hard, nointr, noposix, cto, ac :: Running Hook [archiso_pxe_common] IP-Config: eth0 hardware address 52:54:00:12:34:57 mtu 1500 IP-Config: eth0 guessed broadcast address 192.168.0.255 IP-Config: eth0 guessed nameserver address 192.168.0.218 IP-Config: eth0 complete (from 192.168.0.218): address: 192.168.0.90 broadcast: 192.168.0.255 netmask: 255.255.255.0 gateway: 192.168.0.218 dns0 : 192.168.0.218 dns1 : 0.0.0.0 rootserver: 192.168.0.218 rootpath: filename : :: Running Hook [archiso_pxe_nbd] :: Running Hook [archiso_pxe_curl] :: Running Hook [archiso_pxe_nfs] :: Mounting '192.168.0.77:/mnt/iso' ... 192.168.0.77:/mnt/iso/ on /run/archiso/bootmnt type nfs (rw,relatime,vers=3,rsize=524288,wsize=524288,namlen=255,hard,nolock,proto=tcp,port=65535,timeo=7,retrans=3,sec=sys,local_lock=all,addr=192.168.0.77) ... My /etc/exports /mnt/iso 192.168.0.90(ro,no_subtree_check,no_root_squash)
2011-11-28[archiso] Add archiso_pxe_curl hookGerardo Exequiel Pozzi
Its add support for downloading the ISO image via HTTP/FTP with curl or download *.sfs files. The files are downloaded on /run/archiso/curlspace (tmpfs) and setup a loop dev from it (like in archiso_loop_mnt) in the ISO case, or just do a bind mount to /run/archiso/bootmnt in the other case. This hook must be located after archiso_pxe_nbd in mkinitcpio.conf, in that way NBD is the default. New bootparm: * archiso_curl_url=(first form) archiso_curl_url=http://192.168.0.7/archlinux/iso/archlinux.iso (absolute form) Use an absolute URL. Fetch the entire ISO archiso_curl_url=ftp://${pxeserver}/archlinux/iso/archlinux.iso (relative form) Use the as IP the same server where PXE reside. Fetch the entire ISO * archiso_curl_url=(second form) archiso_curl_url=http://192.168.0.7/archlinux/iso/unpacked (absolute form) Use an absolute URL. Where unpacked (an example name) is a directory where ${archisobasedir} ("arch" by default) is located with all *.sfs. This fetch only needed files. archiso_curl_url=ftp://${pxeserver}/archlinux/iso/unpacked (relative form) Use the as IP the same server where PXE reside. Where unpacked (an example name) is a directory where ${archisobasedir} ("arch" by default) is located with all *.sfs. This fetch only needed files. * curlspace_size= Set a size for a tmpfs filesystem where files are downloaded. Signed-off-by: Gerardo Exequiel Pozzi <vmlinuz386@yahoo.com.ar>

Copyright © 2002-2022 Judd Vinet and Aaron Griffin. Copyright © 2022 Erich Eckner.
The Arch Linux name and logo are recognized trademarks. Some rights reserved. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a world-wide basis.