Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/mkarchiso
diff options
context:
space:
mode:
Diffstat (limited to 'mkarchiso')
-rwxr-xr-xmkarchiso178
1 files changed, 75 insertions, 103 deletions
diff --git a/mkarchiso b/mkarchiso
index aecdac3..28b1b3f 100755
--- a/mkarchiso
+++ b/mkarchiso
@@ -1,79 +1,80 @@
#!/bin/sh
CONFIG="$(pwd)/mkarchiso.conf"
-CPIOCONFIG="$(pwd)/mkinitcpio.conf"
+CPIOCONFIG="$(pwd)/archiso-mkinitcpio.conf"
DEF_CONFIG_DIR="$(pwd)/default-config"
QUIET="y"
+FORCE="n"
-SKIP_INSTALL="n"
-SKIP_SQUASHFS="n"
-SKIP_BOOTIMG="n"
-SKIP_ISO="n"
+command_name=""
+work_dir=""
+isoname=""
PKGDIR="."
APPNAME=$(basename "${0}")
-ALL_ARGS="${@}"
+ALL_ARGS="${@}" #for fakeroot usage
usage ()
{
- echo "usage ${APPNAME} [options] working-directory imagename.iso"
- echo " -c CONFIG Use CONFIG file. default: /etc/archlive/mkarchiso.conf"
- echo " -i CPIO CONFIG Use CONFIG file for mkinitcpio. default: /etc/archlive/mkinitcpio.conf"
- echo " -s a,b,c Skip creation section. Valid sections are:"
- echo " install : This section installs all packages."
- echo " squashfs: This section creates a squashfs root image"
- echo " bootimg : This section creates a boot image."
- echo " iso : This section builds the final iso."
- echo " -v Verbose output. Default: no"
- echo " -h This message."
+ echo "usage ${APPNAME} [options] command <command options>"
+ echo " general options:"
+ echo " -c CONFIG Use CONFIG file. default: /etc/archlive/mkarchiso.conf"
+ echo " -i CPIO CONFIG Use CONFIG file for mkinitcpio. default: /etc/archlive/mkinitcpio.conf"
+ echo " -f Force overwrite of working files / iso"
+ echo " -v Verbose output. Default: no"
+ echo " -h This message."
+ echo " commands:"
+ echo " install <working dir> : where to build the ISO root"
+ echo " squash <working dir> : generate a squashfs image of the ISO root"
+ echo " iso <working dir> <iso name> : build an iso from the working directory"
+ echo " all <working dir> <iso name> : perform all of the above, in order"
exit 1
}
-skipopts ()
-{
- for i in $@; do
- case $i in
- install) SKIP_INSTALL="y" ;;
- squashfs) SKIP_SQUASHFS="y" ;;
- bootimg) SKIP_BOOTIMG="y" ;;
- iso) SKIP_ISO="y" ;;
- *) echo "invalid section '$i'"; usage ;;
- esac
- done
-}
-
while getopts 'c:i:n:s:pvh' arg; do
- case "$arg" in
- c) CONFIG="$OPTARG" ;;
- i) CPIOCONFIG="$OPTARG" ;;
- s) OLDIFS=$IFS; IFS=,
- skipopts $OPTARG
- IFS=$OLDIFS ;;
+ case "${arg}" in
+ c) CONFIG="${OPTARG}" ;;
+ i) CPIOCONFIG="${OPTARG}" ;;
+ v) FORCE="f" ;;
v) QUIET="n" ;;
h|?) usage ;;
- *) echo "invalid argument '$arg'"; usage ;;
+ *) echo "invalid argument '${arg}'"; usage ;;
esac
done
shift $(($OPTIND - 1))
-if [ $# -ne 2 ]; then
- usage
-else
- work_dir=${1}
- isoname=${2}
-fi
+[ $# -le 1 ] && usage
+
+command_name="${1}"
+case "${command_name}" in
+ install) work_dir="${2}" ;;
+ squash) work_dir="${2}" ;;
+ iso) work_dir="${2}"; isoname="${3}" ;;
+ all) work_dir="${2}"; isoname="${3}" ;;
+ *) echo "invalid command name '${command_name}'"; usage ;;
+esac
+
+[ "x${work_dir}" = "x" ] && (echo "please specify a working directory" && usage)
-if [ -e "${work_dir}" -a "${SKIP_INSTALL}" != "y" ]; then
+if [ -e "${work_dir}" -a "${FORCE}" = "n" ]; then
echo "Working dir '${work_dir}' already exists, aborting..."
exit 1
fi
-if [ -e "${isoname}" -a "${SKIP_ISO}" != "y" ]; then
- echo "ISO Image '${isoname}' already exists, aborting..."
- exit 1
+if [ "${command_name}" = "iso" -o "${command_name}" = "all" ]; then
+ [ "x${isoname}" = "x" ] && (echo "please specify an iso name" && usage)
+ if [ -e "${isoname}" -a "${FORCE}" = "n"]; then
+ echo "ISO Image '${isoname}' already exists, aborting..."
+ exit 1
+ fi
+ if [ -e "${CPIOCONFIG}" ]; then
+ echo "mkinitcpio config '${CPIOCONFIG}' does not exist, aborting..."
+ exit 1
+ fi
fi
+#TODO - do we even need a config file?
if [ -e "${CONFIG}" ]; then
source "${CONFIG}"
else
@@ -81,13 +82,7 @@ else
exit 1
fi
-if [ -e "${CPIOCONFIG}" ]; then
- source "${CPIOCONFIG}"
-else
- echo "mkinitcpio config '${CPIOCONFIG}' does not exist, aborting..."
- exit 1
-fi
-
+# {{{ Build
isoroot="${work_dir}/iso"
instroot="${work_dir}/install"
@@ -104,34 +99,18 @@ _kversion ()
sed "s|.*/lib/modules/\([^/]*\).*/$|\1|")
}
-#Work-arounds for depmod core dumps.... I guess we could just ulimit for now...
-_safepacman ()
-{
- FAKEROOTSAV=$FAKEROOTKEY; unset FAKEROOTKEY
- if ! pacman -Sf --noconfirm -r "${instroot}" $* 2>&1 | grep "\[#"; then
- echo "pacman failed to install '$*', aborting..."
- exit 1
- fi
- FAKEROOTKEY=$FAKEROOTSAV
-}
-safe_install_pkgfile ()
-{
- if [ -e "${1}" ]; then
- toinstall=""
- while read pkg; do
- #skip packages listed in IGNOREPKGS
- echo $ignorepkgs | grep "\<$pkg\>" >/dev/null 2>&1 && continue
- toinstall="${toinstall} ${pkg}"
- done < ${1}
- _safepacman "${toinstall}"
- fi
-}
-
_pacman ()
{
+ #depmod causes fakechroot to coredump - it's harmless, but makes the output ugly
+ fkchroot=""
+ if [ "${1}" = "-safe" ]; then
+ fkchroot=""
+ shift 1
+ fi
+
FAKEROOTSAV=$FAKEROOTKEY; unset FAKEROOTKEY
- if ! fakechroot pacman -Sf --noconfirm -r "${instroot}" $* 2>&1 | grep "\[#"; then
- echo "pacman failed to install '$*', aborting..."
+ #TODO this grep is a tad weird...
+ if ! eval "${fkchroot} pacman -Sf --noconfirm -r \"${instroot}\" $*" | grep "\[#"; then
exit 1
fi
FAKEROOTKEY=$FAKEROOTSAV
@@ -139,17 +118,22 @@ _pacman ()
install_pkgfile ()
{
+ safe=""
+ if [ "${1}" = "-safe" ]; then
+ safe="-safe"
+ shift 1
+ fi
if [ -e "${1}" ]; then
toinstall=""
while read pkg; do
echo $ignorepkgs | grep "\<$pkg\>" >/dev/null 2>&1 && continue
toinstall="${toinstall} ${pkg}"
done < ${1}
- _pacman "${toinstall}"
+ _pacman "${safe}" "${toinstall}"
fi
}
-if [ "${SKIP_INSTALL}" = "n" ]; then
+if [ "${command_name}" = "install" -o "${command_name}" = "all" ]; then
mkdir -p "${isoroot}"
mkdir -p "${instroot}"
@@ -163,9 +147,6 @@ if [ "${SKIP_INSTALL}" = "n" ]; then
echo "Installing 'base' packages..."
install_pkgfile "${PKGDIR}/base.packages"
- echo "Installing _required_ packages..."
- _pacman "memtest86+ unionfs unionfs-utils usbutils libusb pciutils squashfs-tools"
-
echo "Installing custom packages..."
for fil in ${package_files}; do
#TODO search for file if not absolute...
@@ -178,11 +159,8 @@ if [ "${SKIP_INSTALL}" = "n" ]; then
done
echo "Installing kernel '${kernelpkg}'"
- # fakechroot and depmod don't get along well. We'll do that stuff
- # manually...
- # TODO: fix fakechroot instead of working around it like a jackass
FAKEROOTSAV=$FAKEROOTKEY; unset FAKEROOTKEY
- if ! _safepacman "${kernelpkg}" ; then
+ if ! _pacman -safe "${kernelpkg}" ; then
echo "pacman failed to install '${kernelpkg}', aborting..."
exit 1
fi
@@ -190,12 +168,12 @@ if [ "${SKIP_INSTALL}" = "n" ]; then
kernelver=$(_kversion)
kernelsuffix=${kernelver##*-}
echo "Kernel Version ${kernelver} (${kernelsuffix}) installed - installing modules..."
- safe_install_pkgfile "modules.${kernelsuffix}"
+ install_pkgfile -safe "modules.${kernelsuffix}"
echo "Updating module dependancies"
- [ "${kernelsuffix}" == "ARCH" ] && kernelsuffix=""
+ [ "${kernelsuffix}" = "ARCH" ] && kernelsuffix=""
depmod -a -b "${instroot}" -v "${kernelver}" -F "${instroot}/boot/System.map26${kernelsuffix}" >/dev/null
- find "${instroot}/boot" -name *.img -delete
+ find "${instroot}/boot" -name *.img -delete #TODO, will this delete our special stuff?
echo "Applying default configuration for the Arch ISO."
cp -rf ${DEF_CONFIG_DIR}/* "${instroot}"
@@ -236,7 +214,7 @@ if [ "${SKIP_INSTALL}" = "n" ]; then
fi
fi
-if [ "${SKIP_SQUASHFS}" = "n" ]; then
+if [ "${command_name}" = "squash" -o "${command_name}" = "all" ]; then
if [ -e "${isoroot}/archlive.sqfs" ]; then
echo -n "Removing old squashfs image..."
rm "${isoroot}/archlive.sqfs"
@@ -249,7 +227,7 @@ if [ "${SKIP_SQUASHFS}" = "n" ]; then
echo "done in $(echo $start $(date +%s) | awk '{ printf "%0.2f",($2-$1)/60 }') minutes."
fi
-if [ "${SKIP_BOOTIMG}" = "n" ]; then
+if [ "${command_name}" = "iso" -o "${command_name}" = "all" ]; then
kernelver=$(_kversion)
basedir=${instroot}
[ "${instroot:0:1}" != "/" ] && basedir="$(pwd)/${instroot}"
@@ -264,16 +242,10 @@ fi
if [ "${SKIP_ISO}" = "n" ]; then
echo "Creating ISO image..."
- mkisofs ${q} -r -l -b "boot/grub/stage2_eltorito" -uid 0 -gid 0 -no-emul-boot \
+ q=""
+ [ "${QUIET}" = "y" ] && q="-q"
+ mkisofs "${q}" -r -l -b "boot/grub/stage2_eltorito" -uid 0 -gid 0 -no-emul-boot \
-boot-load-size 4 -boot-info-table -publisher "Arch Linux <archlinux.org>" \
- -input-charset=UTF-8 \
- -p "prepared by $NAME" -A "Arch Linux Live/Rescue CD" -copyright /etc/copyright \
- -o "${isoname}" "${isoroot}"
-fi
-
-if [ "${qemu_test}" = "y" ]; then
- echo "Testing image via qemu..."
- qemu -boot d -kernel-kqemu -cdrom "${isoname}" ${qemuparams}
-else
- echo "Image completed: ${isoname}"
+ -input-charset=UTF-8 -p "prepared by $NAME" -A "Arch Linux Live/Rescue CD" \
+ -copyright /etc/copyright -o "${isoname}" "${isoroot}"
fi