Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authornl6720 <nl6720@gmail.com>2023-06-01 10:11:29 +0300
committernl6720 <nl6720@gmail.com>2023-06-21 16:20:16 +0300
commit17a71ade2ee2fb6c5774bef43e7b8121d00b4bcf (patch)
tree4e626bc92b05dadf3e98ec5b4cad6f1f3cc45f14
parenteb5720331bf72ae9ac97d77b0f7c48c3a3fb7980 (diff)
configs/*/airootfs/etc/mkinitcpio.conf.d/archiso.conf: remove comments and unused options
Set only the custom values for HOOKS and COMPRESSION.
-rw-r--r--configs/baseline/airootfs/etc/mkinitcpio.conf.d/archiso.conf66
-rw-r--r--configs/releng/airootfs/etc/mkinitcpio.conf.d/archiso.conf65
2 files changed, 0 insertions, 131 deletions
diff --git a/configs/baseline/airootfs/etc/mkinitcpio.conf.d/archiso.conf b/configs/baseline/airootfs/etc/mkinitcpio.conf.d/archiso.conf
index 34b1a06..fd9cd48 100644
--- a/configs/baseline/airootfs/etc/mkinitcpio.conf.d/archiso.conf
+++ b/configs/baseline/airootfs/etc/mkinitcpio.conf.d/archiso.conf
@@ -1,67 +1 @@
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run. Advanced users may wish to specify all system modules
-# in this array. For instance:
-# MODULES=(piix ide_disk reiserfs)
-MODULES=()
-
-# BINARIES
-# This setting includes any additional binaries a given user may
-# wish into the CPIO image. This is run last, so it may be used to
-# override the actual binaries included by a given hook
-# BINARIES are dependency parsed, so you may safely ignore libraries
-BINARIES=()
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in any way. This is useful for config files.
-FILES=()
-
-# HOOKS
-# This is the most important setting in this file. The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-## This setup specifies all modules in the MODULES setting above.
-## No raid, lvm2, or encrypted root is needed.
-# HOOKS=(base)
-#
-## This setup will autodetect all modules for your system and should
-## work as a sane default
-# HOOKS=(base udev autodetect block filesystems)
-#
-## This setup will generate a 'full' image which supports most systems.
-## No autodetection is done.
-# HOOKS=(base udev block filesystems)
-#
-## This setup assembles a pata mdadm array with an encrypted root FS.
-## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
-# HOOKS=(base udev block mdadm encrypt filesystems)
-#
-## This setup loads an lvm2 volume group on a usb device.
-# HOOKS=(base udev block lvm2 filesystems)
-#
-## NOTE: If you have /usr on a separate partition, you MUST include the
-# usr, fsck and shutdown hooks.
HOOKS=(base udev modconf archiso block filesystems)
-
-# COMPRESSION
-# Use this to compress the initramfs image. By default, gzip compression
-# is used. Use 'cat' to create an uncompressed image.
-#COMPRESSION="gzip"
-#COMPRESSION="bzip2"
-#COMPRESSION="lzma"
-#COMPRESSION="xz"
-#COMPRESSION="lzop"
-#COMPRESSION="lz4"
-#COMPRESSION="zstd"
-
-# COMPRESSION_OPTIONS
-# Additional options for the compressor
-#COMPRESSION_OPTIONS=()
diff --git a/configs/releng/airootfs/etc/mkinitcpio.conf.d/archiso.conf b/configs/releng/airootfs/etc/mkinitcpio.conf.d/archiso.conf
index 96a8752..b4b3095 100644
--- a/configs/releng/airootfs/etc/mkinitcpio.conf.d/archiso.conf
+++ b/configs/releng/airootfs/etc/mkinitcpio.conf.d/archiso.conf
@@ -1,67 +1,2 @@
-# vim:set ft=sh
-# MODULES
-# The following modules are loaded before any boot hooks are
-# run. Advanced users may wish to specify all system modules
-# in this array. For instance:
-# MODULES=(piix ide_disk reiserfs)
-MODULES=()
-
-# BINARIES
-# This setting includes any additional binaries a given user may
-# wish into the CPIO image. This is run last, so it may be used to
-# override the actual binaries included by a given hook
-# BINARIES are dependency parsed, so you may safely ignore libraries
-BINARIES=()
-
-# FILES
-# This setting is similar to BINARIES above, however, files are added
-# as-is and are not parsed in any way. This is useful for config files.
-FILES=()
-
-# HOOKS
-# This is the most important setting in this file. The HOOKS control the
-# modules and scripts added to the image, and what happens at boot time.
-# Order is important, and it is recommended that you do not change the
-# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
-# help on a given hook.
-# 'base' is _required_ unless you know precisely what you are doing.
-# 'udev' is _required_ in order to automatically load modules
-# 'filesystems' is _required_ unless you specify your fs modules in MODULES
-# Examples:
-## This setup specifies all modules in the MODULES setting above.
-## No raid, lvm2, or encrypted root is needed.
-# HOOKS=(base)
-#
-## This setup will autodetect all modules for your system and should
-## work as a sane default
-# HOOKS=(base udev autodetect block filesystems)
-#
-## This setup will generate a 'full' image which supports most systems.
-## No autodetection is done.
-# HOOKS=(base udev block filesystems)
-#
-## This setup assembles a pata mdadm array with an encrypted root FS.
-## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
-# HOOKS=(base udev block mdadm encrypt filesystems)
-#
-## This setup loads an lvm2 volume group on a usb device.
-# HOOKS=(base udev block lvm2 filesystems)
-#
-## NOTE: If you have /usr on a separate partition, you MUST include the
-# usr, fsck and shutdown hooks.
HOOKS=(base udev modconf kms memdisk archiso archiso_loop_mnt archiso_pxe_common archiso_pxe_nbd archiso_pxe_http archiso_pxe_nfs block filesystems keyboard)
-
-# COMPRESSION
-# Use this to compress the initramfs image. By default, gzip compression
-# is used. Use 'cat' to create an uncompressed image.
-#COMPRESSION="gzip"
-#COMPRESSION="bzip2"
-#COMPRESSION="lzma"
COMPRESSION="xz"
-#COMPRESSION="lzop"
-#COMPRESSION="lz4"
-#COMPRESSION="zstd"
-
-# COMPRESSION_OPTIONS
-# Additional options for the compressor
-#COMPRESSION_OPTIONS=()