# archinstall
Just a bare bone automated [Arch](https://wiki.archlinux.org/index.php/Arch_Linux) install with network deployment instructions based on MAC-address.

# Autorun on Arch Live CD

    # cd ~/archlive
    # echo -e "git\npython-psutil" >> packages.both
    # echo "cd /root" >> ./airootfs/root/customize_airootfs.sh
    # echo "git clone https://github.com/Torxed/archinstall.git" >> ./airootfs/root/customize_airootfs.sh
    # echo "cd archinstall; git checkout net-deploy; cd /root" >> ./airootfs/root/customize_airootfs.sh
    # echo "chmod +x ~/archinstall/archinstall.py" >> ./airootfs/root/customize_airootfs.sh
    # mkdir ./airootfs/etc/skel
    # echo '[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && sh -c ~/archinstall/archinstall.py' >> ./airootfs/etc/skel/.zprofile
    
    # rm -v work*; ./build.sh -v
> Note: `~/archlive` might be different on your system, see [ArchISO#Setup](https://wiki.archlinux.org/index.php/archiso#Setup) for more info.

Whenever this live-cd boots, from here on now - it'll run `archinstall.py` with the `net-deploy` branch.

> CAUTION: If no parameters are given, it will devour the first disk in your system (/dev/sda, /dev/nvme0n1 etc).

# Manually run it on a booted Live CD

    # wget https://raw.githubusercontent.com/Torxed/archinstall/net-deploy/archinstall.py
    # python3 archinstall.py

# Rerunning a installation

    # umount -R /mnt; cryptsetup close /dev/mapper/luksdev
    # python3 ./archinstall/archinstall.py
> Note: This assumes `--post=stay` is set to avoid instant reboot at the end.

# Some parameters you can give it

    --drive=</dev/sdX>
      Which drive to install arch on, if absent, the first disk under /dev/ is used
    
    --size=100% (Default)
      Sets the size of the root filesystem (btrfs)
    
    --start=513MiB (Default)
      Sets the starting location of the root partition
      (TODO: /boot will take up space from 1MiB - <start>, make sure boot is no larger than 513MiB)
    
    --password=0000 (Default)
      Which disk password to use, --password="<STDIN>" for prompt of password.

    --pwfile=/tmp/diskpw (Default)
      Which file to store the disk encryption password while sending it to cryptsetup
    
    --hostname=Arcinstall (Default)
      Sets the hostname of the box
    
    --country=SE (Default)
      Default mirror allocation for fetching packages.
    
    --packages='' (Default)
      Which additional packages to install, defaults to none.
      (Space separated as it's passed unchanged to `pacstrap`
    
    --user=<name>
      Adds an additional username to the system (default group Wheel)
    
    --post=reboot (Default)
      After a successful install, reboots into the system. Use --post=stay to not reboot.

net-deployment structs support all these and more. Custom arguments with string formatting. See [deployments/workstation.json](https://github.com/Torxed/archinstall/blob/net-deploy/deployments/workstation.json) for examples.

## End note

 ![description](description.jpg)