Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/archinstall/lib/installer.py
AgeCommit message (Collapse)Author
2022-04-26Added a try-rerun-except block to grub-install (#1085)Anton Hvornum
* Added a try-rerun-except block to grub-install first with --removable and then without if it fails. I have a sneaky suspicion that it's due to USB drives being the destination medium, but I cannot confirm yet. I've also added peak_output=True and --debug to GRUB so we can catch the issues in the future. * Fixed flake8 complaint
2022-04-26Adding compression as an option (#1084)Anton Hvornum
* Adding compression as an option * Ignore 'misaligned' ending parenthathese * Moved the 'mark compressed' logic into the sub block within manual disk operations. * Fixed flake8 complaints * Muting a complextion warning on manage_new_and_existing_partitions(). It is too complex, but not something that we'll bother with for v2.4.0. As this whole function could be replaced with a new and improved menu system split into tasks rather than one huge if/else.
2022-04-25Bumped up default timout, as 5 seconds is not enough for some platforms.Anton Hvornum
2022-04-11This should address and resolve #587 (#1070)Anton Hvornum
* This should address and resolve #587 * Forgot one line from copying from local test script Co-authored-by: Anton Hvornum <anton.feeds@gmail.com>
2022-03-28Added error handling to fstab (#1045)Anton Hvornum
* Added error handling to fstab * Checking the exit code for == 0
2022-03-28Issues with Network Management and user management in menu (#1036)Werner Llácer
* A problem with default values treatment at superusers (and users) on the main menu * Solving issues when changing the selection of nic, ask_to_configure_network failed in several places. Solved, temporarily with the creation of __getitem__ and get methods at NetworkManager * Accept old style definitions for nic * flake8 complains * log string corrected (issue 1039) * Correct exit when no disk is selected and we don't wish to continue
2022-03-07Adding sudoers.d file instead of appending to sudoers (#1025)Eugênio Pacceli Reis da Fonseca
* Addresses issue #985: Add sudoers.d file instead of appending to sudoers * Fixed comment * Added string safety check for illegal chars before attempting to create a file. * Fixing commentaries * More fixes to the sudoers.d modification: adds an includedir to sudoers if sudoers.d did not exist previously, waits for python to close and release the new rule file before attempting to set its permissions to 440. * Regex fix and better code formatting.
2022-02-28Rework network config (#1001)Daniel
* Update network configuration * Rework network configuration * Update documentation * Fix flake8 * Update Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com> Co-authored-by: Anton Hvornum <anton.feeds@gmail.com>
2022-02-28Fix (some) mypy things (#996)Daniel
* Fix mypy things * Fix flake8 Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
2022-02-23Issue992 (#1004)Werner Llácer
* Solves issue 992 * flake8 complains Co-authored-by: Anton Hvornum <anton@hvornum.se>
2022-02-18Check if pacman is available (#958)Daniel
* Check if pacman is available * Update pacman call * Added a graceful wait to `run_pacman` * Fix flake8 Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com> Co-authored-by: Anton Hvornum <anton.feeds+github@gmail.com>
2022-02-13Add multilib flag and enable multilib-testing if testing flag is also passed ↵Dylan M. Taylor
(#975) * Add multilib flag to enable this repository and enable multi-lib testing if testing flag is also passed * Fix comments * Attempt to force pacman to use the config file from the host * Make sure the pacman configuration is copied to target * flake8
2022-02-12Don't enable multilib-testing unless we want multilib enabled. (#974)Dylan M. Taylor
* Don't enable multilib-testing unless we want multilib enabled. * flake8 * Rename variable to make code more clear
2022-02-12Add a flag to install testing repositories (#967)Dylan M. Taylor
* Add a boolean to install testing repos, default to false * More work on adding structure * Add logic to enable testing repos. * Corrections * Make flake8 happy about regex escapes * Flake8 doesn't like whitespace around equals * Fix trailing whitespace character
2022-02-08Change usage `lsblk` to `blkid` where possible. And general improvements to ↵Anton Hvornum
disk handling. (#949) * Renamed all_disks() to all_blockdevices() as it's technically a bit more correct. As it would return partitions as well. And it now distinguishes between BlockDevice() and Partition() when returning values. Also lsblk has been replaced with blkid and glob.glob() on /sys/class/block/ * Added handling of loop devices * Added device information enrichment * Removed old code * Updated the usage of blockdevice.info['type'] to 'DEVTYPE' as per returned by blkid instead of lsblk * Created a MapperDev() and DMCryptDev() 'disk' classes. This should help differentiate between BlockDevice(), Partition() and crypt-specific devices. Due to some new helper functions (mentioned later) BlockDevice().device_or_backfile has been simplified thanks to the information being pre-existing instead of having to call losetup. BlockDevice().mountpoint has been added as a dummy function. archinstall.enrich_blockdevice_information() has been added to enrich information extracted from blkid. archinstall.uevent() has been created to parse blkdid data when in -o export format, also eats up /sys/class/x/y/uevent data which is of the same format. all_blockdevices() now returns mapper devices found under /dev/mapper/ and properly returns the different types, not just BlockDevice() for everything. archinstall.get_parent_of_partition() has been added, which can translate /dev/sda1 to /dev/sda via strings by using /sys/class/block/ - note here tho that it has to be a blockdevice. Other parents won't return properly. archinstall.find_mountpoint() was created to be able to find mountpoints for a device, rather than the other way around which get_mount_info() handles. find_mountpoint() will convert /dev/sda1 -> /boot for instance, whereas get_mount_info('/boot') will convert /boot -> /dev/sda1. archinstall.get_partitions_in_use() will now properly traverse the entire structure, not just one level deep. This called for the creation of get_all_targets() which will take a dictionary structure and look for 'target': '/path' and return all '/path' values, recursively without being trapped in get_partitions_in_use() which has recursive targets. get_partitions_in_use() now returns a dictionary instead of a list, as it also returns the mountpoint and associated device. It will also prioritize MapperDev over DMCryptDev (as MapperDev is a child of DMCryptDev and can be resolved, other way around is 'trickier'). * Reverted Installer().partitions to return only the partitions. It's a slight speed defecit by not returning the mountpoints directly as {mntpoint: partition}, because the partition.mountpoint is a bit slow. But it avoids breaking legacy code :) * Fixed a few imports, and added MapperDev.filesystem * Fixed so that Installer().detect_encryption() uses the new separated logic of MapperDev/DMCryptDev/Partition * Fixing a translation issue on hostname * Added DMCryptDev.filesystem * Added back archinstall.all_disks() for legacy reasons. * Added a deprecation warning to archinstall.all_disks() * Added a enrichment check for dm-crypt specific devices, which in turn sets DMCRYPT_NAME on the device information, making it easier to detect and target DMCryptDev when needed. This should avoid issues with loopdevices being detected as DMCryptDev. Also some minor tweaks to variable names on unencrypted setups * Made debug output hidden without --verbose. Also added get_subvolume_info() which takes a path and returns any 'btrfs subvol show' information on the path * Partition().subvolumes has been added. Which generates an iterator over potential subvolumes based on mountpoint. Partition().mount_information is now a list of mount-destinations, as one partition should be allowed to be mounted to several places (more commonly used in btrfs subvolumes). BtrfsSubvolume() has been added as a 'device type', which should make it more easy to recognize a BtrfsSubvolume object right out of the gate. Only found from Partition().subvolumes currently. * Parameter fix for --verbose in log() * Made sure loopdev devices have a PATH key as well, to make dealing with them as blockdevice as seamless as possible. * Added backup information grabbing on uninitated devices * Tweaked backup option if losetup cannot find the blockdev * looks like losetup doesn't exit with a bad code even when it should. Raising ourselves when information is empty. * Fixed structure returned from get_blockdevice_uevent() * Made sure that fallback to blkid and loopdev info returns a PTTYPE (Partition Table Type) that is None, since we can't locate it yet (empty drive). But it's not False either, which is what logic after is looking for * Deprecated split_bind_name() and added more debugging * get_partitions_in_use() now only iterates over Partition() objects. And properly checks all mountpoints, not only the first. * Flipped SysCallError to show the last 500 bytes if data rather than the first, to catch the actual errors. * Removed anonymous parameters to all_blockdevices() * Added .mount_information to MapperDev * Added typing annotations * Partition().mountpoint is now a @property that will live-report the current mountpoint. * Removed the need for setting Partition().mountpoint = X when calling .mount() and .unmount(), as it's live-reported instead. * Added .subvolumes to MapperDev() * Added debug information * Muting F841 in helpers.py * Tweaked debug information in get_mount_info() * Minimized log output by moving Partition().mountpoint to DEBUG, as partitions are allowed to not be mounted * Simplified Installer().add_bootloader() to act as a router to the new split function, one for each bootloader type. This since flake8 complained about complexity and I agree that it became to wild.
2022-02-06Update nationalization (#944)Daniel
* Update nationalization * Update translations * Finish german translation * Fix errors #943 * Add remaining translations * Fix alignment in menu * Update README * Update translations: * Fix flake8 * Update tz function Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
2022-02-03Command locales (second batch) (#886)Werner Llácer
* flexibilize the definition of execution locale for OS commands executed via the SysCommand* interface. Defined a storage argument which holds the default Added functions to unset the program own locales reset to the program default locales set a specific locale A decorator to execute functions in the host locale environment * rename decorator local_environ to host_locale_environ created a simmetric decorator c_locale_environ, to make a routine work with the C locale whatever is set * Correct definition of btrfs standard layout * Added error handling * Fixed issue where archinstall.Boot() would raise an exception in vain * Added debugging for SysCommandWorker() * Added some debugging * Tweaking debug a bit * Tweaking debug * Adding more debug * Adding more debug * Removed some debugging * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Removed soem debugging * Removed soem debugging * Testing a revert * Adding back the reverted change, adding lofile * Redirecting stdout to /dev/null for testing (to avoid interrupting the fork) * Reverted debug changes * Testing os.system() Co-authored-by: Anton Hvornum <anton@hvornum.se>
2022-01-26Update installer.py (#1) (#793)OneLongneck
Added "--removable" after "--bootloader-id=GRUB" on Line 669, because it would throw an input/output error without it on my laptop
2022-01-20Disable zswap (#883)Thomas
Disable zswap when using zram. The swap device is now initialised before the bootloader, inline with the installation guide.
2022-01-20Enable periodic TRIM (#882)Thomas
2022-01-15Missing arguments after GlobalMenu execution (issue #868) (#871)Werner Llácer
* Install.__init__ parameter kernel as a list everywhere. I've dropped the string check, as it shouldn't happen again, and it's good that it fails, when it happens * Global Menu now loads in the arguments dict all options enabled with default value and no manually selected (issue #868)
2022-01-15Changes to take correctly the 'kernels' argument (cf. isssue 868) (#869)Werner Llácer
2022-01-07Fixed import error ModuleType (#848)Anton Hvornum
Co-authored-by: Anton Hvornum <anton.feeds@gmail.com>
2022-01-07Btrfs II (#838)Werner Llácer
* Btrfs with encrypted partitions. We have changed installer.mount_ordered_layout into a series of loops * open the encrypted devices * manage btrfs subvolumes * mount whatever * create kyefiles for encrypted volumes We have simplified the btrfs subvolume manager We merged the locale branch as it is needed here * We allow only the creation of keyfiles if the partition does not contain the root mount point. Also, adapt examples/only_hd to the new __init__.py Also, assorted flake8 warnings * Cleanup code * Naming schema for encrypted volumes revert global locale association (provisional) * We introduce the option of defining mount options in the partition dictionary. It has forced us to define two new entries in this dictionary: * format_options (formerly options) for mkfs options and * mount_options for mount -o ones. The different meaning of compress between partition and subvolumes is treated * Function lib/disk/btrfs.py mount_subvolume marked as deprecated Code cleanup. * format_options now filesystem.options * format_options now filesystem.format_options mount_options nof filesystem.mount_options * flake8 uncovered a slip in the code
2022-01-06Added type annotations to all functions (#845)Anton Hvornum
* Added type annotations for 1/5 of the files. There's bound to be some issues with type miss-match, will sort that out later. * Added type hints for 4/5 of the code * Added type hints for 4.7/5 of the code * Added type hints for 5/5 of the code base * Split the linters into individual files This should help with more clearly show which runner is breaking since they don't share a single common name any longer. Also moved mypy settings into pyproject.toml * Fixed some of the last flake8 issues * Missing parameter * Fixed invalid lookahead types * __future__ had to be at the top * Fixed last flake8 issues
2022-01-02Adding a Pipewire application profile (#821)Anton Hvornum
* Adding a Pipewire application profile This to better manage the pipewire setup process and minimize guided a bit. This also adds the concept of @archinstall.plugin decorators to add a plugin in run-time. Which pipewire uses to detect user creation and enable the pipewire-pulse service for new users. * Forgot to run .install() on pipewire Application() * Backwards compatible variable insertion for installation session
2022-01-01!= -> is notAnton Hvornum
2021-12-31Btrfs2 (#787)Werner Llácer
* All the changes needed to make btrfs subvolumes work. It boils down to two points; the handling of the addressing of subvolumes re. physical partitions, and the small changes at the bootloader level * We added a new script only_hd for testing purposes. It only handles hadrd drive management * restoring an escape hatch during subvolume processing * hipercommented manage_btrfs_subvolumes * Ready to be able to select and process options in subvolume mounting * Separte nodatacow processing * Solving a flake8 complain * Use of bind names @ get_filesystem_type * compress mount option bypass * Preparations for encryption handling * Compatibility to master version re. encrypted btrfs volumes * Now we can create subvolumes and mountpoints inside an encrypted btrfs partition * changes for entries file generation with systemd-bootctl * flake8 corrections plus some comments Co-authored-by: Anton Hvornum <anton@hvornum.se>
2021-12-31Bringing in changes from v2.3.1-dev branch. This fixes a selection of things ↵Anton Hvornum
mentioned in #819.
2021-12-11fix logic: could not detect root **or** bootMTC
2021-11-24Removed silent 'ok' on mkdir and path for chmod on crypttab setup (#768)Anton Hvornum
* Removed silent 'ok' on mkdir for encryption key dir * Fixed chmod path during crypttab setup
2021-11-24Issue #764 Modify inclusion of self.BINARIES entry due to a mistype (#765)Werner Llácer
* Modify inclusion of self.BINARIES entry due to a mistype
2021-11-24Support encrypting multiple partitions (#759)Anton Hvornum
* Added support for storing disk encryption keyfiles and add them to a keyslot. * Added a luks2().add_key() function in order to inject a keyfile into a keyslot on a encrypted volume. * Simplified 'missing encryption password' logic in Filesystem(). Added a call to luks2().add_key() after the root-password is set on the volume, to add the keyfile in slot 2 * Adding in password handling in luks2().add_key(). It's required to enter a previous passphrase to unlock the volume and add a new keyslot. Also simplified the handling of partition in Installer().mount_ordered_layout() * Adding in encryption on all partitions except /boot when encryption is opted in * Removed setting size on Partition() as it's a read only value. No idea how Partition().size = size hasn't caused an issue before. Removed size=X argument to Partition() * Added a uniqueness to the loopdevice name. This should ensure that multiple encrypted volumes can be opened at the same time, except for Partition().detect_inner_filesystem() operations which can only happen one at a time since they share namespace. This should never be an issue since archinstall is single threaded and no concurrent operations can/should happen. * Added partprobe() as part of disk/helpers.py, added a /dev/ -> UUID mapper function called convert_device_to_uuid(path). Added a luks2().crypttab() function that sets up a /etc/crypttab entry. * Moved the responsability for telling archinstall to generate a keyfile from Filesystem() to user_interaction.py. This should in the future be a user-input based value, and not something the Filesystem() automatically dictates. * Added a retry mechanism to luks2().encrypt() to avoid having to re-start the installation when a device simply wasn't up yet. * Swapping UUID= lookup from loopdev to physdev.
2021-11-23Add accessibility packages to installed system if using the on the live ISO ↵Dylan M. Taylor
(#760) * Add group of accesibility tools * Conditionally extend base packages * Enable it if accessibility in use in guided * Fix circular import
2021-11-22NTFS Root Filesystem Support (#748)Dylan M. Taylor
* For fun, allow NTFS as a root filesystem type Add ability to format a filesystem as NTFS Try to force filesystem type Fix FAT mounting * Split out mount fs type method * Handle rootfstype on non-GRUB bootloaders * Add -Q to mkfs.ntfs command line for quick formatting * I believe this will fix GRUB with NTFS root * Remove the fsck hook if NTFS is used as the root partition * Looks like the string is ntfs3 not ntfs so this logic wasn't running
2021-11-17Fixing broken encryption support in GRUB (#724)Anton Hvornum
* Added multiple `partprobe` calls and added a `.partprobe()` function on partitions, filesystem and blockdevice. * Adding retry attempts to all UUID related operations tied to the boot process * Tweaked logging for mounting and disk related operations * Removed potential SysCall exception disruptor causing exceptions to go by unnoticed * Increased the start position from 1MiB to 5MiB of /boot partition * Optimized the GRUB installation & config code * Improved Partition().uuid to never return None. Instead it will raise an exception if it can't get a PARTUUID within X retries with Y delay per attempt. * Increased sleep timer for partition uuid retrieval, because even with a 3 second sleep it wasn't long enough even on fast devices. * Make GRUB install to /dev/sda instead of /dev/sda1. * Added 10 retries for retreiving PARTUUID with a one second sleep. Instead of increasing the sleep simply add more retries until we find a good balance on slower disks.
2021-11-17Merge PR #716 - Support for efistub-bootloader (API only)Anton Hvornum
Add EFISTUB bootloader support through config/api calls using: ```json { "bootloader": "efistub", "kernels": [ "linux", "linux-lts" ] } ```
2021-11-16Clarification on boot entries when using multiple kernelsAnton Hvornum
2021-11-16Safe dictionary retrievalAnton Hvornum
2021-11-16removed redundant importAnton Hvornum
2021-11-16Removed redundant boot-partition retrieval.Anton Hvornum
2021-11-16Linting issuesAnton Hvornum
2021-11-16Added more logging for debugging purposesAnton Hvornum
2021-11-16Improved error message when failing to detect mount information.Anton Hvornum
2021-11-16Fix unknown-ucode message for EFISTUB bootloaderEttore Forigo
2021-11-15Fix boot partition detection for EFISTUB bootloaderEttore Forigo
2021-11-14Add EFISTUB bootloader supportEttore Forigo
2021-11-11Modified last few places where password gets set.Anton Hvornum
2021-11-07Fixes #690 by Clearing storage['active_boot'] if shutdown was successful (#691)Anton Hvornum
* Clear storage variable if shutdown was successful * Adding shutdown monitoring and debug output. * It seams systemd-run gets a connection reset from running 'shutdown now', but in a good way - so it doesn't raise any exceptions. Or at least that's what it looks like.
2021-11-06Merge branch 'master' of https://github.com/archlinux/archinstall into ↵Anton Hvornum
torxed-fix-109