Send patches - preferably formatted by git format-patch - to patches at archlinux32 dot org.
summaryrefslogtreecommitdiff
path: root/archinstall/lib/disk
AgeCommit message (Collapse)Author
2022-08-09Converted paths to pathlib.Path and mount points to detect properly (#1412)Anton Hvornum
* Converted a path to pathlib.Path * Using Partition.mountpoints instead of Partition.mountpoint * Update mapperdev.py * Added .mountpoints to MapperDev * Spelling error
2022-08-01fix `valid_parted_position()` (#1382)Samaoo
* fix `valid_parted_position()` * make lines shorter * change `pos` to `pos.lower()` * revert changing `if not len(pos):` to `if not pos:` * `b` can not have decimal places * add `.lower()`
2022-08-01Solves issue 1343. Could not locate partition after creation (#1355)Werner Llácer
* Solves issue 1343. Could not locate partition after creation * Added some flake fixes. Co-authored-by: Anton Hvornum <anton@hvornum.se>
2022-07-26Cleanup partition (#1333)Daniel Girtler
* Cleanup partition * Update * Remove unused method * Update partitioning * Update * Update * Fix mypy Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
2022-06-14Update list manager (#1331)Daniel Girtler
* Rework partition management * Update * Update list manager * Update * Update Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
2022-06-07Update blockdevice (#1289)Daniel Girtler
* Update blockdevice class Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
2022-06-06Update the subvolume menu - fix for #1278 (#1297)Daniel Girtler
* Update subvolume * Add mypy compliance Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com> Co-authored-by: Anton Hvornum <anton@hvornum.se>
2022-05-29Cleanup and version changes in prep for releaseAnton Hvornum
2022-05-29Fix "Unknown device" error when using erofs (#1232) (#1275)demostanis
2022-05-29Fix typos (#1265)Kian-Meng Ang
2022-05-28Removes btrfs subvolume warnings on incorrect subvolume locations (#1267)Anton Hvornum
* Adding debug information * Adding debug information * Adding debug information * Removed a 'already-a-subvolume' check as it requires more information. * Adding debug information * Adding debug information * Made sure Partition().subvolumes() only attempts to retrieve btrfs subvolume information if fstype==btrfs. * Removed debug information
2022-05-28Fixes additional encryption prompt even tho partitions was marked for ↵Anton Hvornum
encryption (#1264) Corrected the check for partitions marked with `encrypt: true`
2022-05-27Fix mixup of mount options and fstype during mount (#1258)Anton Hvornum
Fixed issue where `options` wasn't passed as `options=options` and got mixed up as fs-type.
2022-05-27Removed debug informationAnton Hvornum
2022-05-27Creates partition label on drives with zero partitions before adding ↵Anton Hvornum
partitions (#1256) * If BlockDevice.partitions is zero, we set a new partition label to ensure new drives are setup correctly * Added a sleep after mklabel. * Removed redundant log message. * Tweaked log message from print() to log(). * Trying PARTUUID in reusage of partitions. * Debugging.
2022-05-27Fix dual-booting (#1250)Anton Hvornum
# Fixes * Optimized partition lookups * Fixed re-use of partition UUID's * `BlockDevice().get_partition()` now supports looking up both `PARTUUID` and `UUID` for a partition under itself * Partitions listed in `--disk-layout` that doesn't have a PARTUUID/UUID should no longer cause an exception, but instead logs a warning and they will simply be ignored * `Filesystem().add_partition()` now handles `DiskError` raised by `partition.part_uuid` * Fixed issue on normal partitions where the device was not properly frozen in `lambda` calls, meaning two or more mount-points shared the same `device_instance`. * Lowered global `DISK_RETRY_ATTEMPTS` to 5, as the timeouts are linear *(`range(DISK_RETRY_ATTEMPTS) * DISK_TIMEOUTS`)*
2022-05-26Fix MapperDev.subvolumes (#1249)Anton Hvornum
* Fixed a silent try/except, and MapperDev.subvolumes should now work. * MapperDev.subvolumes now properly sends a pathlib.Path.
2022-05-26Rework btrfs handling (#1234)Anton Hvornum
* Restructuring btrfs.py into lib/btrfs/*.py * Reworking how BTRFS subvolumes get represented, and worked with. Subvolumes are now their own entity which can be used to access it's information, parents or mount location. * Added BtrfsSubvolume.partition and other stuff. * Reworking the way luks2().unlock and .format() returns device instances. They should now return BTRFSSubvolume where appropriate. * Fixed a missing import * Fixed an issue where mkfs.btrfs wouldn't trigger due to busy disk. * Fixing subvol mounting without creating a fake instance. * Added creation of mountpint for btrfs subvolume * Fixed root detection * Re-worked mounting into a queue system using frozen mounting calls using lambda * Removed old mount_subvolume() function * Removed get_subvolumes_from_findmnt() * Fixed Partition().subvolumes iteration * Adding .root to BtrfsSubvolume * Fixed issue in SysCommandWorker where log output would break and crash execution due to cmd being a string vs list * Changed return-value from MapperDev.mountpoint to pathlib.Path
2022-05-18Enhance view (#1210)Daniel Girtler
* Add preview for menu entries * Fix mypy * Update * Update * Fix mypy Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
2022-05-18Added a HSM menu entry (#1196)Anton Hvornum
* Added a HSM menu entry, but also a safety check to make sure a FIDO device is connected * flake8 complaints * Adding FIDO lookup using cryptenroll listing * Added systemd-cryptenroll --fido2-device=list * Removed old _select_hsm call * Fixed flake8 complaints * Added support for locking and unlocking with a HSM * Removed hardcoded paths in favor of PR merge * Removed hardcoded paths in favor of PR merge * Fixed mypy complaint * Flake8 issue * Added sd-encrypt for HSM and revert back to encrypt when HSM is not used (stability reason) * Added /etc/vconsole.conf and tweaked fido2_enroll() to use the proper paths * Spelling error * Using UUID instead of PARTUUID when using HSM. I can't figure out how to get sd-encrypt to use PARTUUID instead. Added a Partition().part_uuid function. Actually renamed .uuid to .part_uuid and created a .uuid instead. * Adding missing package libfido2 and removed tpm2-device=auto as it overrides everything and forces password prompt to be used over FIDO2, no matter the order of the options. * Added some notes to clarify some choices. * Had to move libfido2 package install to later in the chain, as there's not even a base during mounting :P
2022-05-17Fix #1162 (#1204)Daniel Girtler
Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
2022-05-16Don't assume children exists (#1193)Anton Hvornum
2022-05-16Adding safe methods for __repr__ to call so that it doesn't break (#1190)Anton Hvornum
2022-05-09Introduce ctrl+c and other bug fixes (#1152)Daniel Girtler
* Intergrate ctrl+c * stash * Update * Fix profile reset * flake8 Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
2022-05-05Fix 1117 (#1126)Daniel Girtler
* Fix 1117 * Update * flake8 Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
2022-04-29unlocked luks2 partitions were missing a BlockDevice parameter. It's ↵Anton Hvornum
technically not the true block device, as the mapper dev belongs to a partition, but in this context blockdev means the harddrive/medium that the partition (unlocked or otherwise) lives on. (#1100)
2022-04-26Torxed issue 1083 (#1090)Anton Hvornum
* Optimized a bunch of partprobe calls. Namely fixed sleep calls, added optional path to the general archinstall.partprobe() call. And fixed some error handling in a few places which should tell us where #1083 might be going wrong. * Fixed some flake8 complaints * Fixed sleep having a min() of 0.1 or given value. * Fixed sleep having a correct range variable. * Fixed sleep logic to use max() instead of min() as it will never use the higer sleep values otheride * Added error handling to Partition().partprobe() as it would cause certain issues with USB disks. Also made Partition()._safe_uuid more safe by eliminating exceptions being raised.
2022-04-26Optimized a bunch of partprobe calls. (#1088)Anton Hvornum
* Optimized a bunch of partprobe calls. Namely fixed sleep calls, added optional path to the general archinstall.partprobe() call. And fixed some error handling in a few places which should tell us where #1083 might be going wrong. * Fixed some flake8 complaints * Fixed sleep having a min() of 0.1 or given value. * Fixed sleep having a correct range variable. * Fixed sleep logic to use max() instead of min() as it will never use the higer sleep values otheride
2022-04-26Adding compression as an option (#1084)Anton Hvornum
* Adding compression as an option * Ignore 'misaligned' ending parenthathese * Moved the 'mark compressed' logic into the sub block within manual disk operations. * Fixed flake8 complaints * Muting a complextion warning on manage_new_and_existing_partitions(). It is too complex, but not something that we'll bother with for v2.4.0. As this whole function could be replaced with a new and improved menu system split into tasks rather than one huge if/else.
2022-04-25Created a routine to check if a partition includes a certain mountpoint (#1069)Werner Llácer
For a btrfs volume with a subvolume to be mounted on /, we will not generate a keyfile anymore
2022-04-22Fix blockdevice key error (#1079)Daniel
Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
2022-04-03Partition.boot works now for GPT and MBR disks (issue #1061) (#1063)Werner Llácer
2022-03-10Additions to Listmgr et alia (#1028)Werner Llácer
* Permit multiple default actions as a list * Define headers for list at ListManager and Menu * small corrections for default values * Make subvolume info work. The real marker that signifies that a mounted subvolume exist is the bracket notation nor the at sign
2022-02-28Fix (some) mypy things (#996)Daniel
* Fix mypy things * Fix flake8 Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
2022-02-08Change usage `lsblk` to `blkid` where possible. And general improvements to ↵Anton Hvornum
disk handling. (#949) * Renamed all_disks() to all_blockdevices() as it's technically a bit more correct. As it would return partitions as well. And it now distinguishes between BlockDevice() and Partition() when returning values. Also lsblk has been replaced with blkid and glob.glob() on /sys/class/block/ * Added handling of loop devices * Added device information enrichment * Removed old code * Updated the usage of blockdevice.info['type'] to 'DEVTYPE' as per returned by blkid instead of lsblk * Created a MapperDev() and DMCryptDev() 'disk' classes. This should help differentiate between BlockDevice(), Partition() and crypt-specific devices. Due to some new helper functions (mentioned later) BlockDevice().device_or_backfile has been simplified thanks to the information being pre-existing instead of having to call losetup. BlockDevice().mountpoint has been added as a dummy function. archinstall.enrich_blockdevice_information() has been added to enrich information extracted from blkid. archinstall.uevent() has been created to parse blkdid data when in -o export format, also eats up /sys/class/x/y/uevent data which is of the same format. all_blockdevices() now returns mapper devices found under /dev/mapper/ and properly returns the different types, not just BlockDevice() for everything. archinstall.get_parent_of_partition() has been added, which can translate /dev/sda1 to /dev/sda via strings by using /sys/class/block/ - note here tho that it has to be a blockdevice. Other parents won't return properly. archinstall.find_mountpoint() was created to be able to find mountpoints for a device, rather than the other way around which get_mount_info() handles. find_mountpoint() will convert /dev/sda1 -> /boot for instance, whereas get_mount_info('/boot') will convert /boot -> /dev/sda1. archinstall.get_partitions_in_use() will now properly traverse the entire structure, not just one level deep. This called for the creation of get_all_targets() which will take a dictionary structure and look for 'target': '/path' and return all '/path' values, recursively without being trapped in get_partitions_in_use() which has recursive targets. get_partitions_in_use() now returns a dictionary instead of a list, as it also returns the mountpoint and associated device. It will also prioritize MapperDev over DMCryptDev (as MapperDev is a child of DMCryptDev and can be resolved, other way around is 'trickier'). * Reverted Installer().partitions to return only the partitions. It's a slight speed defecit by not returning the mountpoints directly as {mntpoint: partition}, because the partition.mountpoint is a bit slow. But it avoids breaking legacy code :) * Fixed a few imports, and added MapperDev.filesystem * Fixed so that Installer().detect_encryption() uses the new separated logic of MapperDev/DMCryptDev/Partition * Fixing a translation issue on hostname * Added DMCryptDev.filesystem * Added back archinstall.all_disks() for legacy reasons. * Added a deprecation warning to archinstall.all_disks() * Added a enrichment check for dm-crypt specific devices, which in turn sets DMCRYPT_NAME on the device information, making it easier to detect and target DMCryptDev when needed. This should avoid issues with loopdevices being detected as DMCryptDev. Also some minor tweaks to variable names on unencrypted setups * Made debug output hidden without --verbose. Also added get_subvolume_info() which takes a path and returns any 'btrfs subvol show' information on the path * Partition().subvolumes has been added. Which generates an iterator over potential subvolumes based on mountpoint. Partition().mount_information is now a list of mount-destinations, as one partition should be allowed to be mounted to several places (more commonly used in btrfs subvolumes). BtrfsSubvolume() has been added as a 'device type', which should make it more easy to recognize a BtrfsSubvolume object right out of the gate. Only found from Partition().subvolumes currently. * Parameter fix for --verbose in log() * Made sure loopdev devices have a PATH key as well, to make dealing with them as blockdevice as seamless as possible. * Added backup information grabbing on uninitated devices * Tweaked backup option if losetup cannot find the blockdev * looks like losetup doesn't exit with a bad code even when it should. Raising ourselves when information is empty. * Fixed structure returned from get_blockdevice_uevent() * Made sure that fallback to blkid and loopdev info returns a PTTYPE (Partition Table Type) that is None, since we can't locate it yet (empty drive). But it's not False either, which is what logic after is looking for * Deprecated split_bind_name() and added more debugging * get_partitions_in_use() now only iterates over Partition() objects. And properly checks all mountpoints, not only the first. * Flipped SysCallError to show the last 500 bytes if data rather than the first, to catch the actual errors. * Removed anonymous parameters to all_blockdevices() * Added .mount_information to MapperDev * Added typing annotations * Partition().mountpoint is now a @property that will live-report the current mountpoint. * Removed the need for setting Partition().mountpoint = X when calling .mount() and .unmount(), as it's live-reported instead. * Added .subvolumes to MapperDev() * Added debug information * Muting F841 in helpers.py * Tweaked debug information in get_mount_info() * Minimized log output by moving Partition().mountpoint to DEBUG, as partitions are allowed to not be mounted * Simplified Installer().add_bootloader() to act as a router to the new split function, one for each bootloader type. This since flake8 complained about complexity and I agree that it became to wild.
2022-02-06Update nationalization (#944)Daniel
* Update nationalization * Update translations * Finish german translation * Fix errors #943 * Add remaining translations * Fix alignment in menu * Update README * Update translations: * Fix flake8 * Update tz function Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com>
2022-02-04disk layout: allow to omit partition "start" option to start from previous ↵Victor Gavro
partition end (#895) * disk layout: allow to omit partition "start" option to start from previous partition end * mixed tabs/spaces fixes * Update filesystem.py Co-authored-by: Anton Hvornum <anton.feeds+github@gmail.com>
2022-02-03Command locales (second batch) (#886)Werner Llácer
* flexibilize the definition of execution locale for OS commands executed via the SysCommand* interface. Defined a storage argument which holds the default Added functions to unset the program own locales reset to the program default locales set a specific locale A decorator to execute functions in the host locale environment * rename decorator local_environ to host_locale_environ created a simmetric decorator c_locale_environ, to make a routine work with the C locale whatever is set * Correct definition of btrfs standard layout * Added error handling * Fixed issue where archinstall.Boot() would raise an exception in vain * Added debugging for SysCommandWorker() * Added some debugging * Tweaking debug a bit * Tweaking debug * Adding more debug * Adding more debug * Removed some debugging * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Adding more debug * Removed soem debugging * Removed soem debugging * Testing a revert * Adding back the reverted change, adding lofile * Redirecting stdout to /dev/null for testing (to avoid interrupting the fork) * Reverted debug changes * Testing os.system() Co-authored-by: Anton Hvornum <anton@hvornum.se>
2022-02-02Migrate old input to new menu (#874)Daniel
* Migrate old input to new menu * Fix imports * Remove imports * Update * Fixed import by changing 'import archinstall', to 'from ..menu import Menu' and use Menu() directly * Converted archinstall.<thing> to from ..where import <thing>. This enables us to use archinstall as a module, a git repository in testing and other things without having to install archinstall as an actual module. Co-authored-by: Daniel Girtler <girtler.daniel@gmail.com> Co-authored-by: Anton Hvornum <anton@hvornum.se>
2022-02-02Torxed fix sys command calls (#932)Anton Hvornum
* Fixed exceptions in is_vm() and virtualization() * Added exception handling for parted in BlockDevice.free_space
2022-02-01Issue923 (#927)Werner Llácer
* Correct definition of btrfs standard layout * Solving issue 923. Standarize keyword "wipe" to signal the need of formatting a FS * flake8 complains
2022-01-25Correct definition of btrfs standard layout (#906)Werner Llácer
2022-01-25Fixing the 'device_instance' being None in some partition places (#902)Anton Hvornum
* Added a new return value from add_partition. Also added an exception to make sure `add_partition` can't continue silently * Added a log of debugging to add_partition * Removed a blank line (flake8) * Misconfigured variable * Added some more debugging information to partprobe * FIX: disk layout: partprobe should be called and checked only for target device (#896) * disk layout: partprobe should be called and checked only for target device * disk layout: partprobe: removed unnecessary bash subprocess * Properly defined BlockDevice() on Partition() creation. Also made sure mount-checks got some rrro handling and non-block devices should no longer attempt to return a size Co-authored-by: Anton Hvornum <anton.feeds@gmail.com> Co-authored-by: Victor Gavro <vgavro@gmail.com>
2022-01-25Make text for getting filesystems more grammatically correct (#903)Dylan M. Taylor
* Make text for getting filesystems more grammatically correct Use 'Retry attempt {count} of 10.' instead of Waiting for the {count} time". It's more grammatically correct since we're not doing '1st', '2nd', etc. * Maybe mention waiting still
2022-01-25FIX: disk layout: partprobe should be called and checked only for target ↵Victor Gavro
device (#896) * disk layout: partprobe should be called and checked only for target device * disk layout: partprobe: removed unnecessary bash subprocess
2022-01-25Removed last lsblk to grab PARTUUID (#901)Anton Hvornum
Co-authored-by: Anton Hvornum <anton.feeds@gmail.com>
2022-01-14Unified filesystem names by using get_mount_fs_type() function before ↵Anton Hvornum
.format() is called
2022-01-14Changed the default btrfs layout to have @ as /Anton Hvornum
2022-01-08partition.py: Use exit code for mkfs.fat exception (#853)Romain Goncalves
When using archinstall on an existing Arch Linux installation, (e.g. for migrating the current system on a new drive), no exception is raised if mkfs.vfat is missing in the base install (no dosfstools package currently installed).
2022-01-07Btrfs II (#838)Werner Llácer
* Btrfs with encrypted partitions. We have changed installer.mount_ordered_layout into a series of loops * open the encrypted devices * manage btrfs subvolumes * mount whatever * create kyefiles for encrypted volumes We have simplified the btrfs subvolume manager We merged the locale branch as it is needed here * We allow only the creation of keyfiles if the partition does not contain the root mount point. Also, adapt examples/only_hd to the new __init__.py Also, assorted flake8 warnings * Cleanup code * Naming schema for encrypted volumes revert global locale association (provisional) * We introduce the option of defining mount options in the partition dictionary. It has forced us to define two new entries in this dictionary: * format_options (formerly options) for mkfs options and * mount_options for mount -o ones. The different meaning of compress between partition and subvolumes is treated * Function lib/disk/btrfs.py mount_subvolume marked as deprecated Code cleanup. * format_options now filesystem.options * format_options now filesystem.format_options mount_options nof filesystem.mount_options * flake8 uncovered a slip in the code